KALLAX Shelf unit, white, 16 3/8x57 5/8 "
+5⅛″ margin
Will fit in a ?
Yes, it will fit!
Good news: KALLAX Shelf unit, white, 30 1/8x57 5/8 " should fit diagonally in a Cupra Formentor VZ 2023 with seats down.
Fit Details
With seats down, Good news - this package should fit. You have about +5⅝″ of clearance at opening width when loading diagonal. We're about 95% confident in this estimate.
KALLAX Shelf unit, white, 30 1/8x57 5/8 "
Box: 59″ × 15¾″ × 6½″ · 68 lb 5 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Aug 06, 2026
Package
Status
Limiting factor
Best orientation
Package #1
59″ × 15¾″ × 6½″
Status:+5⅝″ margin
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
39″ / 27½″
Cargo width / height
39⅜″ / 31⅞″
Cargo length seats up / down
31⅞″ / 62⅝″
Sill to floor drop
4⅜″
Cupra Formentor VZ 2023
Measurements last checked and updated on Jul 26, 2026
Helpful tips
Use these loading tips to improve your chances of fitting KALLAX Shelf unit, white, 30 1/8x57 5/8 " in Cupra Formentor VZ 2023.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Other items to check in Cupra Formentor VZ 2023
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Cupra Formentor VZ 2023 boot
The Cupra Formentor VZ gives you a compact performance SUV boot: an opening 39″ wide × 27½″ tall, a floor 31⅞″ long with the seats up, and 39⅜″ across at its narrow point. Fold the rear bench and the floor grows to 62⅝″, a gain of 30¾″, so the car nearly doubles its length once the seats drop. The tight point is that 39″ opening. Wide or long loads have to go in on a diagonal, and tall boxes are capped by the 27½″ height. It takes medium cartons and folded flat-packs well, but not full-length wardrobe frames. Fold the seats first, feed long boxes corner in, and mind the 4⅜″ lip.
About the KALLAX Shelf unit, white, 30 1/8x57 5/8 " package
The KALLAX comes as a single flat carton, 59″ × 16″ × 6½″, and it carries real weight at 68 lb 5 oz for one box. It is a stiff, square-edged panel pack: not long enough to be unmanageable, but wide at 16″ and heavy enough that you will not want to hold it out at arm's length. A hatchback with the rear seats folded usually takes it, and an estate or SUV takes it without thinking. The weight is the thing to plan for. Keep it flat, slide it across the boot floor, and load it last.
Frequently asked questions
Find quick answers about fit for KALLAX Shelf unit, white, 30 1/8x57 5/8 " in Cupra Formentor VZ 2023, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will KALLAX Shelf unit, white, 30 1/8x57 5/8 " fit in Cupra Formentor VZ 2023?
Yes. With seats down, it fits with +5⅝″ at Opening width. Best orientation: diagonal.
What is the tightest part?
The limiting factor is Opening width, with +5⅝″ margin in seats down.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with +5⅝″ around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats down.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.
Does it fit with seats up or seats down?
Seats up: No (-12⅛″). Seats down: Yes (+5⅝″). Default selection follows YES > MAYBE > NO.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Yes.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with +5⅝″ margin.
How tight is this fit?
This result is in the good clearance band (+5⅝″ at Opening width).