KALLAX Shelf unit, white, 43 7/8x57 5/8 "
+8⅛″ margin
Will fit in a ?
Yes, it will fit!
Good news: KALLAX Shelf unit, white, 16 3/8x57 5/8 " should fit diagonally in a Cupra Formentor VZ 2023 with seats down.
Fit Details
With seats down, Good news - this package should fit. You have about +5⅛″ of clearance at opening width when loading diagonal. We're about 95% confident in this estimate.
KALLAX Shelf unit, white, 16 3/8x57 5/8 "
Box: 60¾″ × 16″ × 4¾″ · 39 lb 11 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Aug 30, 2026
Package
Status
Limiting factor
Best orientation
Package #1
60¾″ × 16″ × 4¾″
Status:+5⅛″ margin
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
39″ / 27½″
Cargo width / height
39⅜″ / 31⅞″
Cargo length seats up / down
31⅞″ / 62⅝″
Sill to floor drop
4⅜″
Cupra Formentor VZ 2023
Measurements last checked and updated on Jul 26, 2026
Helpful tips
Use these loading tips to improve your chances of fitting KALLAX Shelf unit, white, 16 3/8x57 5/8 " in Cupra Formentor VZ 2023.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Other items to check in Cupra Formentor VZ 2023
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Cupra Formentor VZ 2023 boot
The Cupra Formentor VZ gives you a compact performance SUV boot: an opening 39″ wide × 27½″ tall, a floor 31⅞″ long with the seats up, and 39⅜″ across at its narrow point. Fold the rear bench and the floor grows to 62⅝″, a gain of 30¾″, so the car nearly doubles its length once the seats drop. The tight point is that 39″ opening. Wide or long loads have to go in on a diagonal, and tall boxes are capped by the 27½″ height. It takes medium cartons and folded flat-packs well, but not full-length wardrobe frames. Fold the seats first, feed long boxes corner in, and mind the 4⅜″ lip.
About the KALLAX Shelf unit, white, 16 3/8x57 5/8 " package
The KALLAX travels as one long, flat carton: 60¾ inches by 16 inches, just 4¾ inches thick, at 39 lb 11 oz. The length is the whole challenge. A box this long clears very few trunk openings with the rear seats up, so plan on folding them before you leave the driveway. A wagon or mid-size SUV with the bench down takes it flat on the floor; a small hatchback needs it angled between the wheel arches. Particleboard this heavy flexes in a slim sleeve, so carry it on edge with a hand at each end, and rotate it diagonally through door frames instead of pushing it square.
Frequently asked questions
Find quick answers about fit for KALLAX Shelf unit, white, 16 3/8x57 5/8 " in Cupra Formentor VZ 2023, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will KALLAX Shelf unit, white, 16 3/8x57 5/8 " fit in Cupra Formentor VZ 2023?
Yes. With seats down, it fits with +5⅛″ at Opening width. Best orientation: diagonal.
What is the tightest part?
The limiting factor is Opening width, with +5⅛″ margin in seats down.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with +5⅛″ around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats down.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.
Does it fit with seats up or seats down?
Seats up: No (-12⅛″). Seats down: Yes (+5⅛″). Default selection follows YES > MAYBE > NO.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Yes.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with +5⅛″ margin.
How tight is this fit?
This result is in the good clearance band (+5⅛″ at Opening width).