MARKUS Office chair, Vissle dark gray, Medium
+13½″ margin
Will fit in a ?
Yes, it will fit!
Good news: GULLIVER Crib, white, 27 1/2x52 " should fit in a straight orientation in a Cupra Formentor VZ 2023 with seats down.
Fit Details
With seats down, Good news - this package should fit. You have about +7″ of clearance at opening width when loading straight. We're about 95% confident in this estimate.
GULLIVER Crib, white, 27 1/2x52 "
Box: 53½″ × 30¾″ × 5″ · 46 lb 5 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Jul 23, 2026
Package
Status
Limiting factor
Best orientation
Package #1
53½″ × 30¾″ × 5″
Status:+7″ margin
Limited by
Limiting factor:Opening width
Best orientation:Straight
Vehicle limits
Opening width / height
39″ / 27½″
Cargo width / height
39⅜″ / 31⅞″
Cargo length seats up / down
31⅞″ / 62⅝″
Sill to floor drop
4⅜″
Cupra Formentor VZ 2023
Measurements last checked and updated on Jul 26, 2026
Helpful tips
Use these loading tips to improve your chances of fitting GULLIVER Crib, white, 27 1/2x52 " in Cupra Formentor VZ 2023.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Keep a straight loading path
Keep the package straight and level while loading.
Other items to check in Cupra Formentor VZ 2023
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Cupra Formentor VZ 2023 boot
The Cupra Formentor VZ gives you a compact performance SUV boot: an opening 39″ wide × 27½″ tall, a floor 31⅞″ long with the seats up, and 39⅜″ across at its narrow point. Fold the rear bench and the floor grows to 62⅝″, a gain of 30¾″, so the car nearly doubles its length once the seats drop. The tight point is that 39″ opening. Wide or long loads have to go in on a diagonal, and tall boxes are capped by the 27½″ height. It takes medium cartons and folded flat-packs well, but not full-length wardrobe frames. Fold the seats first, feed long boxes corner in, and mind the 4⅜″ lip.
About the GULLIVER Crib, white, 27 1/2x52 " package
The GULLIVER crib ships as one flat box, 53½″ × 30¾″ × 5″, so it is long, fairly wide and thin. At 46 lb 5 oz it is a two-hand lift, and the awkward part is the 30¾″ width, which is more than plenty of boot openings will take head on. Fold a rear seat and most hatchbacks, estates and SUVs handle it flat. Slide it in diagonally at the door so the width clears the frame, and keep the painted panel faces protected, since a crib side scratches easily.
Frequently asked questions
Find quick answers about fit for GULLIVER Crib, white, 27 1/2x52 " in Cupra Formentor VZ 2023, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will GULLIVER Crib, white, 27 1/2x52 " fit in Cupra Formentor VZ 2023?
Yes. With seats down, it fits with +7″ at Opening width. Best orientation: straight.
What is the tightest part?
The limiting factor is Opening width, with +7″ margin in seats down.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with +7″ margin.
How tight is this fit?
This result is in the comfortable clearance band (+7″ at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-4⅜″). Seats down: Yes (+7″). Default selection follows YES > MAYBE > NO.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Yes.
Which loading orientation works best?
Straight is the best orientation for this result in seats down.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.