Willfit in a?

No, it won't fit.

It will not fit in this setup: BILLY Bookcase, white, 80x28x202 cm is too large for a Peugeot 308 2022 with seats up.

Peugeot 308 2022

Fit Details

With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 64.2 cm even with diagonal loading. We're about 95% confident in this estimate.

BILLY Bookcase, white, 80x28x202 cm

BILLY Bookcase, white, 80x28x202 cm

Box: 206 × 30 × 13 cm · 36.85 kg

Based on IKEA UK (United Kingdom).

Package dimensions last checked and updated on Mar 01, 2026

Also on IKEA:United States
  • Package #1

    206 × 30 × 13 cm

    Status:64.2 cm short

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Peugeot 308 2022

Opening width / height

96 cm / 74 cm

Cargo width / height

82 cm / 91 cm

Cargo length seats up / down

78 cm / 148 cm

Loading sill height

70 cm

Peugeot 308 2022

Measurements last checked and updated on Jul 06, 2026

Helpful tips

Use these loading tips to improve your chances of fitting BILLY Bookcase, white, 80x28x202 cm in Peugeot 308 2022.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the Peugeot 308 2022 boot

The Peugeot 308 gives you a hatchback boot that is short but usefully deep. The opening is 96 cm wide by 74 cm tall, and the floor runs 78 cm with the seats up, stretching to 148 cm once you fold the rear bench, a gain of 70 cm. The narrow point of the floor is 82 cm across, so wide flat loads sit fine, but anything past 78 cm long needs the seats down. The load lip sits 70 cm off the ground with a 17 cm drop, so heavy boxes lift in then settle low. It takes suitcases and boxed furniture well, long flat-pack less so. Fold the seats before you load, not halfway through.

About the BILLY Bookcase, white, 80x28x202 cm package

The BILLY bookcase ships flat in one long pack: 206 cm long, 30 cm wide, 13 cm thick, 36.9 kg. The narrow profile is friendly, the 2 m length is not. Most hatchbacks and small SUVs cannot take it seats up: you need the rear bench folded and a clean diagonal line through the cabin. Estates, large SUVs, and crossovers like the Tesla Model Y handle it without effort. Slide it in flat with the long edge along the floor and protect the printed face: a single scratch ruins the front board.

On pickup day

BILLY looks slim, but it still will not fit the Peugeot 308. The single package is 206 cm long, and with the seats up the best diagonal leaves you 64.2 cm short of the 96 cm opening. Fold the rear seats and the floor gains a useful 40 cm, yet you remain 24.2 cm short, so it stays a no either way. The box is only 30 cm wide and 13 cm tall, so it is the length alone that beats you here, not the bulk. A long flat load like this wants an estate or a van with the seats down. Measure your boot opening first, and mind the parcel shelf.

Frequently asked questions

Find quick answers about fit for BILLY Bookcase, white, 80x28x202 cm in Peugeot 308 2022, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will BILLY Bookcase, white, 80x28x202 cm fit in Peugeot 308 2022?

No. With seats up, it is short by 64.2 cm at Opening width, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening width, with -64.2 cm margin in seats up.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -64.2 cm margin.

How tight is this fit?

This result is in the clear no-fit band (-64.2 cm at Opening width).

Does it fit with seats up or seats down?

Seats up: No (-64.2 cm). Seats down: No (-24.2 cm). Default selection follows YES > MAYBE > NO.

Why does it not fit?

The blocker is Opening width. The worst margin is -64.2 cm in seats up, so clearance is below the required buffer.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -64.2 cm around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.