POÄNG Armchair, birch veneer/Knisa light beige
+2⅛″ margin
WillBILLY Bookcase, white, 31 1/2x11x79 1/2 "fit in aPeugeot 308 2022?
No, it won't fit.
It will not fit in this setup: BILLY Bookcase, white, 31 1/2x11x79 1/2 " is too large for a Peugeot 308 2022 with seats up.
Fit Details
With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 25⅜″ even with diagonal loading. We're about 95% confident in this estimate.
BILLY Bookcase, white, 31 1/2x11x79 1/2 "
Box: 81¼″ × 11¾″ × 5″ · 88 lb 1 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Jun 18, 2026
Also on IKEA:United Kingdom
Package
Status
Limiting factor
Best orientation
Package #1
81¼″ × 11¾″ × 5″
Status:25⅜″ short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
37¾″ / 29⅛″
Cargo width / height
32¼″ / 35⅞″
Cargo length seats up / down
30¾″ / 58¼″
Loading sill height
27½″
Peugeot 308 2022
Measurements last checked and updated on Jul 06, 2026
Helpful tips
Use these loading tips to improve your chances of fitting BILLY Bookcase, white, 31 1/2x11x79 1/2 " in Peugeot 308 2022.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Peugeot 308 2022
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Peugeot 308 2022 boot
The Peugeot 308 gives you a hatchback boot that is short but usefully deep. The opening measures 37¾″ wide by 29⅛″ tall, and the floor runs 30¾″ with the seats up, stretching to 58¼″ once you fold the rear bench, a gain of 27½″. The narrow point of the floor is 32¼″ across, so wide flat loads sit fine, but anything past 30¾″ long needs the seats down. The load lip sits 27½″ off the ground with a 6¾″ drop to the floor, so heavy boxes take a short lift then settle low. It takes suitcases and boxed furniture well, long flat-pack less so. Fold the seats before you load, not halfway through.
About the BILLY Bookcase, white, 31 1/2x11x79 1/2 " package
The BILLY ships as one long, flat carton, 81¼″ × 11¾″ × 5″, and it is heavier than it looks at 88 lb 1 oz. The shape is the awkward part: long and only 5″ thick, a rigid panel box that will not bend or fold around a wheel arch. That length rules out most boots with the seats up. You want an estate, a hatchback with the rear seats folded, or an SUV that gives a flat run past the front seats. Two people make this easy. Carry it on edge, slide it in low, and rest the leading edge on something soft.
Frequently asked questions
Find quick answers about fit for BILLY Bookcase, white, 31 1/2x11x79 1/2 " in Peugeot 308 2022, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will BILLY Bookcase, white, 31 1/2x11x79 1/2 " fit in Peugeot 308 2022?
No. With seats up, it is short by 25⅜″ at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -25⅜″ margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -25⅜″ margin.
How tight is this fit?
This result is in the clear no-fit band (-25⅜″ at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-25⅜″). Seats down: No (-9½″). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -25⅜″ in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -25⅜″ around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.