
GULLIVER Crib, white, 27 1/2x52 "
+5⅞″ margin
Maybe, it's a tight fit.

Fit Details

SLATTUM Upholstered bed frame, Vissle dark gray, Queen
Box: 65½″ × 29″ × 4″ · 81 lb 13 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Aug 14, 2026
Package
Status
Limiting factor
Best orientation
Package #1
65½″ × 29″ × 4″
Status:+½″ tight
Limited by
Limiting factor:Opening height
Best orientation:Diagonal
Vehicle limits

Opening width / height
40⅛″ / 30¾″
Cargo width / height
37¾″ / 34⅝″
Cargo length seats up / down
30¾″ / 61″
Loading sill height
28″
Peugeot 2008 2020
Measurements last checked and updated on Jul 16, 2026
Helpful tips
Use these loading tips to improve your chances of fitting SLATTUM Upholstered bed frame, Vissle dark gray, Queen in Peugeot 2008 2020.
Manage opening height
Keep the highest edge low at the trunk opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Clear real-world obstacles
Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.
Alternatives that fit in Peugeot 2008 2020
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Peugeot 2008 2020 boot
The Peugeot 2008 boot is a compact space that changes character the moment you fold the rear seats. Upright, the floor runs 30¾″, enough for a weekly shop and a couple of cases but little that is long. Fold the bench and it stretches to 61″, a gain of 30⅜″, so long flat boxes come into play. The opening is 40⅛″ wide by 30¾″ tall, wider than the 37¾″ floor, so boxes clear the mouth but lean on that folded length. The load lip sits 28″ off the ground with only a 3⅞″ drop to the floor, so lift to the sill, then slide straight in.
About the SLATTUM Upholstered bed frame, Vissle dark gray, Queen package
SLATTUM in Queen packs the whole upholstered frame into one long flat box: 65½″ × 29″ × 4″, weighing 81 lb 13 oz. The shape is the difficulty: over 65″ long, wide enough to argue with most trunk openings, and heavy enough that the thin box flexes when carried by the ends. It suits an SUV, a wagon, or any car with the rear seats folded flat. Feed it in low corner first on the diagonal and support the middle as you slide: the packaging gives up at the handholds long before the frame inside is at risk.
Frequently asked questions
Find quick answers about fit for SLATTUM Upholstered bed frame, Vissle dark gray, Queen in Peugeot 2008 2020, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will SLATTUM Upholstered bed frame, Vissle dark gray, Queen fit in Peugeot 2008 2020?
Maybe. With seats down, this is a borderline fit at Opening height (+½″). Best orientation: diagonal.
What is the tightest part?
The limiting factor is Opening height, with +½″ margin in seats down.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Maybe.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening height) with +½″ margin.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats down.
Does it fit with seats up or seats down?
Seats up: No (-13½″). Seats down: Maybe (+½″). Default selection follows YES > MAYBE > NO.
What can I try to make it work?
Use diagonal loading and focus on opening height. Keep the highest edge low at the trunk opening. Load diagonally first, then straighten once inside.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with +½″ around the limiting point.
What could change the result in real life?
Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.
How tight is this fit?
This result is in the borderline band (+½″ at Opening height).