
POÄNG Armchair, birch veneer/Knisa light beige
+4½″ margin
All items that fit a Peugeot 2008 2020
Yes, it will fit!

Fit Details

SYVDE Dressing table, white, 39 1/2x19″
Box: 41¾″ × 19½″ × 2¾″ · 44 lb 9 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Oct 21, 2026
Package
Status
Limiting factor
Best orientation
Package #1
41¾″ × 19½″ × 2¾″
Status:+3⅛″ to spare
Limited by
Limiting factor:Cargo length
Best orientation:Diagonal
Package #2
41¾″ × 19¼″ × 2¼″
Status:+3⅜″ to spare
Limited by
Limiting factor:Cargo length
Best orientation:Diagonal
Vehicle limits

Opening width / height above sill
40⅛″ / 26¾″
Cargo width / height
37¾″ / 30¾″
Cargo length seats up / down
30¾″ / 61″
Loading sill height
28″
Peugeot 2008 2020
Measurements last checked and updated on Oct 21, 2026
Helpful tips
Use these loading tips to improve your chances of fitting SYVDE Dressing table, white, 39 1/2x19″ in Peugeot 2008 2020.
Use available cargo length
Use seats down if available to gain cargo length.
Load diagonally first
Load diagonally first, then straighten once inside.
Plan package order
Load each package one at a time. Individual package fit does not guarantee all packages will fit stacked together.
Clear real-world obstacles
Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.
Other items to check in Peugeot 2008 2020
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Peugeot 2008 2020 boot
Two figures matter most in the Peugeot 2008's boot. The first is the floor width: 37¾″ at its narrowest, less than the 40⅛″ tailgate opening, so the floor is the width to measure against. The second is the floor length with the rear seats folded: 61″, against 30¾″ with them up. That is the set-up for long flat packs. The opening gives you 26¾″ of clear height above the loading sill, which sits at 28″, and the floor is only 3⅞″ below the sill. Those floor lengths are for a box laid straight: at an angle across the floor, a longer box can still fit.
About the SYVDE Dressing table, white, 39 1/2x19″ package
The SYVDE dressing table is packed in two flat boxes, 77 lb 10 oz between them. Both are 41¾″ long: one is 19½″ wide and 2¾″ thick, the other 19¼″ wide and 2¼″ thick. Neither is big, but both are heavy for their thickness, at 44 lb 9 oz and 33 lb 1 oz, and the narrow edges give your fingers little to hold. Laid flat, the wider box covers 41¾″ of boot floor by 19½″. If you carry them alone, take one at a time, on its long edge at your side, one hand under the bottom edge and the other steadying the top.
Frequently asked questions
Find quick answers about fit for SYVDE Dressing table, white, 39 1/2x19″ in Peugeot 2008 2020, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will SYVDE Dressing table, white, 39 1/2x19″ fit in Peugeot 2008 2020?
Yes. With seats up, it fits with 3⅛″ to spare at Cargo length. Best orientation: diagonal.
What is the tightest part?
The limiting factor is Cargo length, with +3⅛″ margin in seats up.
Which package is the hardest to load?
Package #1 (41¾″ × 19½″ × 2¾″) is the tightest, with +3⅛″ at Cargo length.
Do all packages fit in the car at the same time?
We test each package individually. All packages fitting individually does not guarantee they will fit stacked together. You may need multiple trips.
Do all packages fit?
Yes. All 2 packages fit individually in seats up. The tightest one is Package #1 (41¾″ × 19½″ × 2¾″).
Does it fit with seats up or seats down?
Seats up: Yes (+3⅛″). Seats down: Yes (+18¼″). Default selection follows YES > MAYBE > NO.
What do YES, MAYBE and NO mean here?
YES means there is at least 2⅜″ to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 2⅜″ to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with +3⅛″ around the limiting point.
What could change the result in real life?
Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.