BRIMNES Cabinet with doors, white, 30 3/4x37 3/8″
+2¾″ margin
All items that fit a Peugeot 2008 2020
Will fit in a ?
No, it won't fit.
It will not fit in this setup: LISABO Table, ash veneer, 55 1/8x30 3/4″ is too large for a Peugeot 2008 2020 with seats up.
Fit Details
With seats up, This package will not fit in this setup. The blocker is cargo width, and you're short by 12¾″ even with diagonal loading. We're about 95% confident in this estimate.
LISABO Table, ash veneer, 55 1/8x30 3/4″
Box: 64¾″ × 32″ × 2″ · 45 lb
Based on IKEA US (United States).
Package dimensions last checked and updated on Oct 21, 2026
Package
Status
Limiting factor
Best orientation
Package #1
64¾″ × 32″ × 2″
Status:12¾″ short
Limited by
Limiting factor:Cargo width
Best orientation:Diagonal
Vehicle limits
Opening width / height above sill
40⅛″ / 26¾″
Cargo width / height
37¾″ / 30¾″
Cargo length seats up / down
30¾″ / 61″
Loading sill height
28″
Peugeot 2008 2020
Measurements last checked and updated on Oct 21, 2026
Helpful tips
Use these loading tips to improve your chances of fitting LISABO Table, ash veneer, 55 1/8x30 3/4″ in Peugeot 2008 2020.
Use available cargo width
Center the package between the side walls before final rotation.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Peugeot 2008 2020
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Peugeot 2008 2020 boot
Two figures matter most in the Peugeot 2008's boot. The first is the floor width: 37¾″ at its narrowest, less than the 40⅛″ tailgate opening, so the floor is the width to measure against. The second is the floor length with the rear seats folded: 61″, against 30¾″ with them up. That is the set-up for long flat packs. The opening gives you 26¾″ of clear height above the loading sill, which sits at 28″, and the floor is only 3⅞″ below the sill. Those floor lengths are for a box laid straight: at an angle across the floor, a longer box can still fit.
About the LISABO Table, ash veneer, 55 1/8x30 3/4″ package
One flat box holds the whole LISABO table: 64¾″ × 32″ × 2″, at 45 lb. At only 2″ thick and 32″ wide, it is too thin to grip well and too broad to carry under one arm. Lying flat and straight, it needs 64¾″ of boot floor, and the opening has to clear that 32″ width one way or the other. Carry it between two people, one at each short end, with your hands under the box rather than pinching the thin edges, and keep it level as you lift it and set it down.
Frequently asked questions
Find quick answers about fit for LISABO Table, ash veneer, 55 1/8x30 3/4″ in Peugeot 2008 2020, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will LISABO Table, ash veneer, 55 1/8x30 3/4″ fit in Peugeot 2008 2020?
No. With seats up, it is short by 12¾″ at Cargo width, even with diagonal loading.
What is the tightest part?
The limiting factor is Cargo width, with -12¾″ margin in seats up.
Why does it not fit?
The blocker is Cargo width: with seats up, the box is 12¾″ bigger than the space there.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -12¾″ around the limiting point.
How tight is this fit?
This result is in the clear no-fit band (-12¾″ at Cargo width).
Does it fit with seats up or seats down?
Seats up: No (-12¾″). Seats down: No (-3¾″). Default selection follows YES > MAYBE > NO.
What do YES, MAYBE and NO mean here?
YES means there is at least 2⅜″ to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 2⅜″ to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.