BRIMNES Cabinet with doors, white, 30 3/4x37 3/8 "
+2½″ margin
Will fit in a ?
Yes, it will fit!
Good news: KALLAX Shelf unit, white, 30 1/8x30 1/8 " should fit diagonally in a Cupra Formentor VZ 2023 with seats up.
Fit Details
With seats up, Good news - this package should fit. You have about +7″ of clearance at opening width when loading diagonal. We're about 95% confident in this estimate.
KALLAX Shelf unit, white, 30 1/8x30 1/8 "
Box: 31¾″ × 16¼″ × 7½″ · 37 lb 8 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Aug 15, 2026
Package
Status
Limiting factor
Best orientation
Package #1
31¾″ × 16¼″ × 7½″
Status:+7″ margin
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
39″ / 27½″
Cargo width / height
39⅜″ / 31⅞″
Cargo length seats up / down
31⅞″ / 62⅝″
Sill to floor drop
4⅜″
Cupra Formentor VZ 2023
Measurements last checked and updated on Jul 26, 2026
Helpful tips
Use these loading tips to improve your chances of fitting KALLAX Shelf unit, white, 30 1/8x30 1/8 " in Cupra Formentor VZ 2023.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Other items to check in Cupra Formentor VZ 2023
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Cupra Formentor VZ 2023 boot
The Cupra Formentor VZ gives you a compact performance SUV boot: an opening 39″ wide × 27½″ tall, a floor 31⅞″ long with the seats up, and 39⅜″ across at its narrow point. Fold the rear bench and the floor grows to 62⅝″, a gain of 30¾″, so the car nearly doubles its length once the seats drop. The tight point is that 39″ opening. Wide or long loads have to go in on a diagonal, and tall boxes are capped by the 27½″ height. It takes medium cartons and folded flat-packs well, but not full-length wardrobe frames. Fold the seats first, feed long boxes corner in, and mind the 4⅜″ lip.
About the KALLAX Shelf unit, white, 30 1/8x30 1/8 " package
The 2x2 KALLAX is one of the easiest IKEA packages you will carry: a single flat box of 31¾″ × 16¼″ × 7½″ at 37 lb 8 oz. At under 32″ long it fits in nearly any trunk without folding a seat, small hatchbacks included. The weight is the only catch: it is dense for its size and the cardboard gives you no handholds. Carry it upright against your body rather than flat by the ends, and lay it on its wide face in the trunk so it cannot flip over on the first speed bump.
Frequently asked questions
Find quick answers about fit for KALLAX Shelf unit, white, 30 1/8x30 1/8 " in Cupra Formentor VZ 2023, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will KALLAX Shelf unit, white, 30 1/8x30 1/8 " fit in Cupra Formentor VZ 2023?
Yes. With seats up, it fits with +7″ at Opening width. Best orientation: diagonal.
What is the tightest part?
The limiting factor is Opening width, with +7″ margin in seats up.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with +7″ margin.
How tight is this fit?
This result is in the comfortable clearance band (+7″ at Opening width).
Does it fit with seats up or seats down?
Seats up: Yes (+7″). Seats down: Yes (+18⅞″). Default selection follows YES > MAYBE > NO.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with +7″ around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.