All items that fit a Cupra Formentor VZ 2023

Will fit in a ?

Yes, it will fit!

Good news: BRIMNES Cabinet with doors, white, 30 3/4x37 3/8″ should fit diagonally in a Cupra Formentor VZ 2023 with seats up.

Cupra Formentor VZ 2023

Fit Details

With seats up, Good news - this package should fit, with 4″ to spare at cargo length when loading diagonal. We're about 95% confident in this estimate.

BRIMNES Cabinet with doors, white, 30 3/4x37 3/8″

BRIMNES Cabinet with doors, white, 30 3/4x37 3/8″

Box: 39″ × 16¾″ × 6″ · 72 lb 7 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Oct 21, 2026

  • Package #1

    39″ × 16¾″ × 6″

    Status:+4″ to spare

    Limiting factor:Cargo length

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Cupra Formentor VZ 2023

Opening width / height above sill

39″ / 23¼″

Cargo width / height

39⅜″ / 27½″

Cargo length seats up / down

31⅞″ / 62⅝″

Sill to floor drop

4⅜″

Cupra Formentor VZ 2023

Measurements last checked and updated on Oct 21, 2026

About the Cupra Formentor VZ 2023 boot

Width is the easy part of the Formentor VZ's boot. The opening is 39″ wide, and the floor is 39⅜″ at its narrowest, so nothing narrows once a box is through. Height is the tight part, and the reason tall boxes struggle: the opening has 23¼″ of clear height above the loading sill, though the boot is 27½″ tall from its floor, which sits 4⅜″ below the sill. Seats up, the floor gives you 31⅞″ of length. Folding the rear seats is worth 30¾″, for 62⅝″, enough for longer flat packs. Whatever face a box rests on, it has to pass under that 23¼″, so decide which side stands up before you lift it.

About the BRIMNES Cabinet with doors, white, 30 3/4x37 3/8″ package

Small box, serious weight. The BRIMNES cabinet packs 72 lb 7 oz into a single box of 39″ × 16¾″ × 6″, and something that compact and heavy is easy to underestimate. Lying flat, it sits on a patch of floor 39″ by 16¾″. The lift is where the care goes. Short as the box is, that weight is a lot to hold while you lean into the boot. Take it as a pair, knees bent and backs straight, and lower it gently all the way down rather than letting it drop the last bit.

Frequently asked questions

Find quick answers about fit for BRIMNES Cabinet with doors, white, 30 3/4x37 3/8″ in Cupra Formentor VZ 2023, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will BRIMNES Cabinet with doors, white, 30 3/4x37 3/8″ fit in Cupra Formentor VZ 2023?

Yes. With seats up, it fits with 4″ to spare at Cargo length. Best orientation: diagonal.

What is the tightest part?

The limiting factor is Cargo length, with +4″ margin in seats up.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with +4″ around the limiting point.

How tight is this fit?

This result is in the tight positive clearance band (+4″ at Cargo length).

Does it fit with seats up or seats down?

Seats up: Yes (+4″). Seats down: Yes (+17¼″). Default selection follows YES > MAYBE > NO.

What do YES, MAYBE and NO mean here?

YES means there is at least 2⅜″ to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 2⅜″ to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.