Willfit in a?

No, it won't fit.

It will not fit in this setup: IVAR Shelving unit, pine, 35x11 3/4x70 1/2 " is too large for a Toyota Yaris 2018 with seats up.

Toyota Yaris 2018

Fit Details

With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 23½″ even with diagonal loading. We're about 95% confident in this estimate.

IVAR Shelving unit, pine, 35x11 3/4x70 1/2 "

IVAR Shelving unit, pine, 35x11 3/4x70 1/2 "

Box: 70½″ × 3½″ × 1¾″ · 6 lb 1 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Jul 08, 2026

  • Package #1

    70½″ × 3½″ × 1¾″

    Status:23½″ short

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Toyota Yaris 2018

Opening width / height

34⅝″ / 34¼″

Cargo width / height

39¾″ / 41″

Cargo length seats up / down

26¾″ / 52⅜″

Loading sill height

26¾″

Toyota Yaris 2018

Measurements last checked and updated on Jul 15, 2026

Helpful tips

Use these loading tips to improve your chances of fitting IVAR Shelving unit, pine, 35x11 3/4x70 1/2 " in Toyota Yaris 2018.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the Toyota Yaris 2018 boot

The Toyota Yaris gives you a compact hatchback trunk. The opening measures 34⅝″ wide by 34¼″ tall, and the floor runs 26¾″ deep with the seats up, so it takes the weekly shop, a buggy, or a couple of small boxes without fuss. Fold the rear bench and the floor stretches to 52⅜″, a gain of 25⅝″, which is where it earns its keep. Anything long, like flat-pack bed frames or wardrobe panels, still overhangs. You lift over a 26¾″ sill then drop 6¾″ to the floor, so slide heavy boxes rather than carry them.

About the IVAR Shelving unit, pine, 35x11 3/4x70 1/2 " package

The IVAR shelving unit packs into one long, slim box: 70 1/2 inches long, 3 1/2 inches wide, and just 1 3/4 inches thick. At 6 lb 1 oz it is light, so the problem is never the weight, it is the length. That 70 1/2 inches of rigid pine will not bend around a wheel arch or a seat back, so a short boot forces it across the cabin at an angle. An estate or a hatchback with the rear seats down takes it easily. Load it flat and straight, thin edge up, and rest the far end against a seat back so it cannot slide when you brake.

Frequently asked questions

Find quick answers about fit for IVAR Shelving unit, pine, 35x11 3/4x70 1/2 " in Toyota Yaris 2018, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will IVAR Shelving unit, pine, 35x11 3/4x70 1/2 " fit in Toyota Yaris 2018?

No. With seats up, it is short by 23½″ at Opening width, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening width, with -23½″ margin in seats up.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -23½″ margin.

How tight is this fit?

This result is in the clear no-fit band (-23½″ at Opening width).

Does it fit with seats up or seats down?

Seats up: No (-23½″). Seats down: No (-10⅞″). Default selection follows YES > MAYBE > NO.

Why does it not fit?

The blocker is Opening width. The worst margin is -23½″ in seats up, so clearance is below the required buffer.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -23½″ around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.