
POÄNG Armchair, birch veneer/Knisa light beige
+1¼″ margin
All items that fit a Toyota Yaris 2018
Yes, it will fit!

Fit Details

KALLAX Shelf unit, white, 30 1/8x30 1/8″
Box: 32″ × 16″ × 7½″ · 37 lb 8 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Oct 21, 2026
Package
Status
Limiting factor
Best orientation
Package #1
32″ × 16″ × 7½″
Status:+3½″ to spare
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits

Opening width / height above sill
34⅝″ / 27½″
Cargo width / height
39¾″ / 34¼″
Cargo length seats up / down
26¾″ / 52⅜″
Loading sill height
26¾″
Toyota Yaris 2018
Measurements last checked and updated on Oct 21, 2026
Helpful tips
Use these loading tips to improve your chances of fitting KALLAX Shelf unit, white, 30 1/8x30 1/8″ in Toyota Yaris 2018.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Other items to check in Toyota Yaris 2018
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Toyota Yaris 2018 boot
Everything you load into the Toyota Yaris 2018 boot has to pass an opening 34⅝″ wide, with 27½″ of clear height above a 26¾″ sill. Past it, the space opens up: the floor is no less than 39¾″ wide, it lies 6¾″ below the sill, and the boot rises 34¼″ above that floor. The floor is only 26¾″ long with the rear seats up, and folding them adds 25⅝″ to reach 52⅜″. Short, chunky boxes suit it, and a few boxes longer than 26¾″ fit with the seats up, turned on their side. So measure every box against those two opening figures first.
About the KALLAX Shelf unit, white, 30 1/8x30 1/8″ package
This KALLAX comes in one compact box of 32″ × 16″ × 7½″, and it weighs 37 lb 8 oz. That is a lot of weight for so small a box, and it is what makes the job awkward. Lying flat on the boot floor, it takes a space 32″ long, 16″ wide and 7½″ high. The risk sits in the lift, so bend your knees and get your hands under the bottom corners, not on its top edges. That keeps your grip under the weight the whole way into the boot.
Frequently asked questions
Find quick answers about fit for KALLAX Shelf unit, white, 30 1/8x30 1/8″ in Toyota Yaris 2018, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will KALLAX Shelf unit, white, 30 1/8x30 1/8″ fit in Toyota Yaris 2018?
Yes. With seats up, it fits with 3½″ to spare at Opening width. Best orientation: diagonal.
What is the tightest part?
The limiting factor is Opening width, with +3½″ margin in seats up.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with +3½″ around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.
Does it fit with seats up or seats down?
Seats up: Yes (+3½″). Seats down: Yes (+18⅝″). Default selection follows YES > MAYBE > NO.
What do YES, MAYBE and NO mean here?
YES means there is at least 2⅜″ to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 2⅜″ to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with +3½″ margin.
How tight is this fit?
This result is in the tight positive clearance band (+3½″ at Opening width).