SYVDE Dressing table, white, 39 1/2x19 "
+1¾″ margin
Will fit in a ?
No, it won't fit.
For IVAR Shelving unit, pine, 35x11 3/4x70 1/2 " in a Peugeot 2008 2020 with seats up: 2 of 3 packages fit, and 1 package does not fit.
Fit Details
With seats up, Not a full fit. 2 of 3 packages fit, and 1 does not fit. Worst case is Package #1 (70½″ × 3½″ × 1¾″), short by 15⅜″ at opening width. Packages that do not fit will need a larger vehicle or delivery. We're about 95% confident in this estimate.
IVAR Shelving unit, pine, 35x11 3/4x70 1/2 "
Box: 70½″ × 3½″ × 1¾″ · 6 lb 1 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Aug 06, 2026
Also on IKEA:United Kingdom
Package
Status
Limiting factor
Best orientation
Package #1
70½″ × 3½″ × 1¾″
Status:15⅜″ short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Package #2
40¼″ × ¾″ × ½″
Status:+4⅜″ margin
Limited by
Limiting factor:Cargo width
Best orientation:Diagonal
Package #3
32¾″ × 11¾″ × ¾″
Status:+9⅝″ margin
Limited by
Limiting factor:Cargo length
Best orientation:Diagonal
Vehicle limits
Opening width / height
40⅛″ / 30¾″
Cargo width / height
37¾″ / 34⅝″
Cargo length seats up / down
30¾″ / 61″
Loading sill height
28″
Peugeot 2008 2020
Measurements last checked and updated on Jul 16, 2026
Helpful tips
Use these loading tips to improve your chances of fitting IVAR Shelving unit, pine, 35x11 3/4x70 1/2 " in Peugeot 2008 2020.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Plan package order
Load each package one at a time. Individual package fit does not guarantee all packages will fit stacked together.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Peugeot 2008 2020
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Peugeot 2008 2020 boot
The Peugeot 2008 boot is a compact space that changes character the moment you fold the rear seats. Upright, the floor runs 30¾″, enough for a weekly shop and a couple of cases but little that is long. Fold the bench and it stretches to 61″, a gain of 30⅜″, so long flat boxes come into play. The opening is 40⅛″ wide by 30¾″ tall, wider than the 37¾″ floor, so boxes clear the mouth but lean on that folded length. The load lip sits 28″ off the ground with only a 3⅞″ drop to the floor, so lift to the sill, then slide straight in.
About the IVAR Shelving unit, pine, 35x11 3/4x70 1/2 " package
The IVAR shelving unit packs into one long, slim box: 70 1/2 inches long, 3 1/2 inches wide, and just 1 3/4 inches thick. At 6 lb 1 oz it is light, so the problem is never the weight, it is the length. That 70 1/2 inches of rigid pine will not bend around a wheel arch or a seat back, so a short boot forces it across the cabin at an angle. An estate or a hatchback with the rear seats down takes it easily. Load it flat and straight, thin edge up, and rest the far end against a seat back so it cannot slide when you brake.
Frequently asked questions
Find quick answers about fit for IVAR Shelving unit, pine, 35x11 3/4x70 1/2 " in Peugeot 2008 2020, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will IVAR Shelving unit, pine, 35x11 3/4x70 1/2 " fit in Peugeot 2008 2020?
No. With seats up, it is short by 15⅜″ at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -15⅜″ margin in seats up.
Why does it not fit?
The blocker is Opening width. The worst margin is -15⅜″ in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -15⅜″ around the limiting point.
Do all packages fit in the car at the same time?
We test each package individually. All packages fitting individually does not guarantee they will fit stacked together. You may need multiple trips.
Does it fit with seats up or seats down?
Seats up: No (-15⅜″). Seats down: No (-1½″). Default selection follows YES > MAYBE > NO.
Which package is the hardest to load?
Package #1 (70½″ × 3½″ × 1¾″) is the tightest, with -15⅜″ at Opening width.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -15⅜″ margin.
How many packages fit and how many do not?
Fit packages: 2. Borderline packages: 0. Not fitting packages: 1.