
POÄNG Armchair, birch veneer/Knisa light beige
+3¼″ margin
No, it won't fit.

Fit Details

HEMNES Daybed frame with 3 drawers, white, Twin
Box: 80¾″ × 11½″ × 2¼″ · 47 lb 6 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Jun 20, 2026
Package
Status
Limiting factor
Best orientation
Package #1
80¾″ × 11½″ × 2¼″
Status:23″ short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Package #2
80½″ × 20¾″ × 2¼″
Status:22¾″ short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Package #3
41″ × 32½″ × 3¼″
Status:2″ short
Limited by
Limiting factor:Opening width
Best orientation:Straight
Package #4
39¼″ × 33″ × 3¼″
Status:-¼″ tight
Limited by
Limiting factor:Opening width
Best orientation:Straight
Vehicle limits

Opening width / height
40⅛″ / 30¾″
Cargo width / height
37¾″ / 34⅝″
Cargo length seats up / down
30¾″ / 61″
Loading sill height
28″
Peugeot 2008 2020
Measurements last checked and updated on Jul 16, 2026
Helpful tips
Use these loading tips to improve your chances of fitting HEMNES Daybed frame with 3 drawers, white, Twin in Peugeot 2008 2020.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Plan package order
Load each package one at a time. Individual package fit does not guarantee all packages will fit stacked together.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Peugeot 2008 2020
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Peugeot 2008 2020 boot
The Peugeot 2008 boot is a compact space that changes character the moment you fold the rear seats. Upright, the floor runs 30¾″, enough for a weekly shop and a couple of cases but little that is long. Fold the bench and it stretches to 61″, a gain of 30⅜″, so long flat boxes come into play. The opening is 40⅛″ wide by 30¾″ tall, wider than the 37¾″ floor, so boxes clear the mouth but lean on that folded length. The load lip sits 28″ off the ground with only a 3⅞″ drop to the floor, so lift to the sill, then slide straight in.
About the HEMNES Daybed frame with 3 drawers, white, Twin package
The HEMNES daybed is a long, flat, heavy load. The largest box measures 80¾″ by 11½″ by 2¼″, so it behaves like a plank: easy to slide, awkward to turn in a tight space. It splits into four packages, and the full set weighs 224 lb, so this is a two-person lift, not a solo one. That 80¾″ length rules out most boots unless you fold the rear seats, which is why an estate, a large SUV or a hatchback with the bench down suits it best. Load the long frame box first, flat along the floor, then stack the lighter drawer boxes on top.
Frequently asked questions
Find quick answers about fit for HEMNES Daybed frame with 3 drawers, white, Twin in Peugeot 2008 2020, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will HEMNES Daybed frame with 3 drawers, white, Twin fit in Peugeot 2008 2020?
No. With seats up, it is short by 23″ at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -23″ margin in seats up.
Why does it not fit?
The blocker is Opening width. The worst margin is -23″ in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -23″ around the limiting point.
Do all packages fit in the car at the same time?
We test each package individually. All packages fitting individually does not guarantee they will fit stacked together. You may need multiple trips.
Does it fit with seats up or seats down?
Seats up: No (-23″). Seats down: No (-6⅞″). Default selection follows YES > MAYBE > NO.
Which package is the hardest to load?
Package #1 (80¾″ × 11½″ × 2¼″) is the tightest, with -23″ at Opening width.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -23″ margin.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.