All items that fit a Cupra Formentor VZ 2023

Will fit in a ?

Yes, it will fit!

Good news: ALEX Desk, white, 52x22 7/8″ should fit in a straight orientation in a Cupra Formentor VZ 2023 with seats down.

Cupra Formentor VZ 2023

Fit Details

With seats down, Good news - this package should fit, with 8⅞″ to spare at cargo length when loading straight. We're about 95% confident in this estimate.

ALEX Desk, white, 52x22 7/8″

ALEX Desk, white, 52x22 7/8″

Box: 53¾″ × 26¾″ × 3¼″ · 81 lb 2 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Oct 21, 2026

  • Package #1

    53¾″ × 26¾″ × 3¼″

    Status:+8⅞″ to spare

    Limiting factor:Cargo length

    Best orientation:Straight

Vehicle limits

Trunk limits for Cupra Formentor VZ 2023

Opening width / height above sill

39″ / 23¼″

Cargo width / height

39⅜″ / 27½″

Cargo length seats up / down

31⅞″ / 62⅝″

Sill to floor drop

4⅜″

Cupra Formentor VZ 2023

Measurements last checked and updated on Oct 21, 2026

About the Cupra Formentor VZ 2023 boot

Width is the easy part of the Formentor VZ's boot. The opening is 39″ wide, and the floor is 39⅜″ at its narrowest, so nothing narrows once a box is through. Height is the tight part, and the reason tall boxes struggle: the opening has 23¼″ of clear height above the loading sill, though the boot is 27½″ tall from its floor, which sits 4⅜″ below the sill. Seats up, the floor gives you 31⅞″ of length. Folding the rear seats is worth 30¾″, for 62⅝″, enough for longer flat packs. Whatever face a box rests on, it has to pass under that 23¼″, so decide which side stands up before you lift it.

About the ALEX Desk, white, 52x22 7/8″ package

The ALEX desk arrives as a single wide, flat box: 53¾″ × 26¾″ × 3¼″. The hard part is the weight, 81 lb 2 oz in one box, with no way to split the load. The width adds to it. At 26¾″ across, it is a broad panel to hold. Lying flat and straight, it needs 53¾″ by 26¾″ of boot floor, and in a shorter boot it has to stand on its side, at an angle across the floor. Treat it as a two-person lift. Each of you takes a short end, and you set it down together so no corner lands first.

Frequently asked questions

Find quick answers about fit for ALEX Desk, white, 52x22 7/8″ in Cupra Formentor VZ 2023, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will ALEX Desk, white, 52x22 7/8″ fit in Cupra Formentor VZ 2023?

Yes. With seats down, it fits with 8⅞″ to spare at Cargo length. Best orientation: straight.

What is the tightest part?

The limiting factor is Cargo length, with +8⅞″ margin in seats down.

Do I need to fold the seats?

Results differ by configuration. Seats up is No and seats down is Yes.

How tight is this fit?

This result is in the comfortable clearance band (+8⅞″ at Cargo length).

Does it fit with seats up or seats down?

Seats up: No (-4⅝″). Seats down: Yes (+8⅞″). Default selection follows YES > MAYBE > NO.

What do YES, MAYBE and NO mean here?

YES means there is at least 2⅜″ to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 2⅜″ to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.

Which loading orientation works best?

Straight is the best orientation for this result in seats down.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.