HAUGA Chest of 3 drawers with shelf, white, 70x46x116 cm
+26.8 cm margin
WillPAX Wardrobe frame, white, 50x58x236 cmfit in aToyota RAV4 2024?
No, it won't fit.
It will not fit in this setup: PAX Wardrobe frame, white, 50x58x236 cm is too large for a Toyota RAV4 2024 with seats up.
Fit Details
With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 77.2 cm even with diagonal loading. We're about 95% confident in this estimate.
PAX Wardrobe frame, white, 50x58x236 cm
Package dimensions last checked and updated on Mar 25, 2026
Package
Status
Limiting factor
Best orientation
Package #1
245 x 59 x 7 cm
Status:77.2 cm short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
104 cm / 87 cm
Cargo width / height
100 cm / 92 cm
Cargo length seats up / down
101 cm / 181 cm
Loading sill height
69 cm
Toyota RAV4 2024
Measurements last checked and updated on Mar 10, 2026
Helpful tips
Use these loading tips to improve your chances of fitting PAX Wardrobe frame, white, 50x58x236 cm in Toyota RAV4 2024.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Toyota RAV4 2024
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Toyota RAV4 2024 boot
The RAV4 2024 is the easy case in this catalogue. The opening runs 104 cm wide by 87 cm tall, the boot floor measures 101 cm long with the seats up and 181 cm folded, and the cargo width stays a consistent 100 cm right back to the rear seats. The sill is a low 69 cm with a 5 cm drop, so you load close to the ground. This boot swallows mid-size flat packs upright, multi-pack loads side by side, and most coffee tables seats up. Anything past 1.8 m still needs the bench folded.
About the PAX Wardrobe frame, white, 50x58x236 cm package
PAX Wardrobe frame ships as a single flat panel: 245 cm long, 59 cm wide, 7 cm thick, close to the length of two adults laid end to end. The flatness helps, but the length is the problem since most cars top out around 180 cm of usable floor with the rear bench folded. You want an estate, a van, or a large SUV with a true flat load floor, otherwise you book delivery. If you do attempt it, slide the panel in flat along the centre line, protect the front edge with a blanket, and load it last so it sits on top.
On pickup day
The RAV4 looks generous on paper at 104 by 87 cm at the mouth and 181 cm of floor with the seats folded, but the PAX at 245 cm long still cannot make the diagonal. Seats up you are 77.2 cm short. Dropping the rear bench gains 46 cm of floor and brings the miss down to 31.2 cm, yet the opening shape stays the binding constraint. The boot lip and parcel shelf bracket eat a bit more in practice, so measure the actual aperture before you commit to this car for the pickup.
Frequently asked questions
Find quick answers about fit for PAX Wardrobe frame, white, 50x58x236 cm in Toyota RAV4 2024, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will PAX Wardrobe frame, white, 50x58x236 cm fit in Toyota RAV4 2024?
No. With seats up, it is short by 77.2 cm at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -77.2 cm margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -77.2 cm margin.
How tight is this fit?
This result is in the clear no-fit band (-77.2 cm at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-77.2 cm). Seats down: No (-31.2 cm). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -77.2 cm in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -77.2 cm around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.