HAUGA Chest of 3 drawers with shelf, white, 70x46x116 cm
+26.8 cm margin
WillHOVET Mirror, aluminium, 78x196 cmfit in aToyota RAV4 2024?
Maybe, it's a tight fit.
It might fit, but it's tight: HOVET Mirror, aluminium, 78x196 cm is borderline in a straight orientation in a Toyota RAV4 2024 with seats up.
Fit Details
With seats up, It's close. This package is a borderline fit at opening height (-1 cm), best loaded straight. See the Helpful tips section below for practical loading suggestions. We're about 75% confident in this estimate.
HOVET Mirror, aluminium, 78x196 cm
Package dimensions last checked and updated on Mar 01, 2026
Package
Status
Limiting factor
Best orientation
Package #1
204 x 85 x 7 cm
Status:-1 cm tight
Limited by
Limiting factor:Opening height
Best orientation:Straight
Vehicle limits
Opening width / height
104 cm / 87 cm
Cargo width / height
100 cm / 92 cm
Cargo length seats up / down
101 cm / 181 cm
Loading sill height
69 cm
Toyota RAV4 2024
Measurements last checked and updated on Mar 10, 2026
Helpful tips
Use these loading tips to improve your chances of fitting HOVET Mirror, aluminium, 78x196 cm in Toyota RAV4 2024.
Manage opening height
Keep the highest edge low at the trunk opening.
Keep a straight loading path
Keep the package straight and level while loading.
Clear real-world obstacles
Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.
Alternatives that fit in Toyota RAV4 2024
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Toyota RAV4 2024 boot
The RAV4 2024 is the easy case in this catalogue. The opening runs 104 cm wide by 87 cm tall, the boot floor measures 101 cm long with the seats up and 181 cm folded, and the cargo width stays a consistent 100 cm right back to the rear seats. The sill is a low 69 cm with a 5 cm drop, so you load close to the ground. This boot swallows mid-size flat packs upright, multi-pack loads side by side, and most coffee tables seats up. Anything past 1.8 m still needs the bench folded.
About the HOVET Mirror, aluminium, 78x196 cm package
The HOVET mirror ships in one flat-pack box, 204 cm long, 85 cm wide and 7 cm thick. Glass is the real concern here, the 15.1 kg weight is light but the panel is fragile and any flex during a turn can crack the surface. The 85 cm width is wider than most flat-pack panels, so even cars that fit the length can struggle on the diagonal. An estate or a tall hatch with seats folded fits it best. Lay it flat on a blanket, never on edge, and brace it against the back of the rear seats.
On pickup day
This is the closest call on the list: a maybe. The HOVET mirror sits 1 cm over what the RAV4 boot opening allows, and that opening is 87 cm tall, the most generous here. One centimetre is within real-world tolerance, so careful loading at a slight angle could just work, though confidence sits at 75 percent. Folding the rear seats does not change the verdict: the floor runs 101 cm up and 181 cm down, and length was never the issue. Measure your own boot lip and the mirror packaging before you rely on it.
Frequently asked questions
Find quick answers about fit for HOVET Mirror, aluminium, 78x196 cm in Toyota RAV4 2024, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will HOVET Mirror, aluminium, 78x196 cm fit in Toyota RAV4 2024?
Maybe. With seats up, this is a borderline fit at Opening height (-1 cm). Best orientation: straight.
What is the tightest part?
The limiting factor is Opening height, with -1 cm margin in seats up.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening height) with -1 cm margin.
Which loading orientation works best?
Straight is the best orientation for this result in seats up.
How confident is this result?
Confidence is 75 out of 100 based on available dimensions and margin tightness.
Does it fit with seats up or seats down?
Seats up: Maybe (-1 cm). Seats down: Maybe (-1 cm). Default selection follows YES > MAYBE > NO.
What can I try to make it work?
Use straight loading and focus on opening height. Keep the highest edge low at the trunk opening. Keep the package straight and level while loading.
What could change the result in real life?
Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.
How tight is this fit?
This result is in the very tight borderline band (-1 cm at Opening height).