All items that fit a Toyota C-HR 2020

Will fit in a ?

Yes, it will fit!

Good news: FRANKLIN Bar stool with backrest, foldable, counter height black/black, 24 3/4″ should fit in a straight orientation in a Toyota C-HR 2020 with seats down.

Toyota C-HR 2020

Fit Details

With seats down, Good news - this package should fit, with 6⅛″ to spare at opening width when loading straight. We're about 95% confident in this estimate.

FRANKLIN Bar stool with backrest, foldable, counter height black/black, 24 3/4″

FRANKLIN Bar stool with backrest, foldable, counter height black/black, 24 3/4″

Box: 43½″ × 21½″ × 5″ · 12 lb 2 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Oct 21, 2026

  • Package #1

    43½″ × 21½″ × 5″

    Status:+6⅛″ to spare

    Limiting factor:Opening width

    Best orientation:Straight

Vehicle limits

Trunk limits for Toyota C-HR 2020

Opening width / height above sill

27½″ / 24¾″

Cargo width / height

37¾″ / 26⅜″

Cargo length seats up / down

30⅜″ / 62⅝″

Loading sill height

30⅜″

Toyota C-HR 2020

Measurements last checked and updated on Oct 21, 2026

About the Toyota C-HR 2020 boot

The C-HR's opening is narrower than its boot. It is 27½″ wide with 24¾″ of clear height above the loading sill, while the floor behind it stays 37¾″ wide at its narrowest. That sill sits 30⅜″ off the ground, and the floor is only 1⅝″ lower. Seats up, you get 30⅜″ of floor. Folding the rear seats adds 32¼″, a big gain, for 62⅝″ in total, though a box that passes the opening can still be too long for that floor. Bulky boxes are the poor match. Check every box against the opening before you think about the floor.

About the FRANKLIN Bar stool with backrest, foldable, counter height black/black, 24 3/4″ package

At 12 lb 2 oz, the FRANKLIN box is light, so its spread is what you have to manage. It is one flat box, 43½″ long, 21½″ wide and 5″ deep: easy to carry, and just as easy to knock. Laid flat, it covers 43½″ of boot floor one way and 21½″ the other. On a box like this the corners take the damage, so keep a hand over the leading corner as it goes into the boot, and lower it in gently instead of pushing it along.

Frequently asked questions

Find quick answers about fit for FRANKLIN Bar stool with backrest, foldable, counter height black/black, 24 3/4″ in Toyota C-HR 2020, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will FRANKLIN Bar stool with backrest, foldable, counter height black/black, 24 3/4″ fit in Toyota C-HR 2020?

Yes. With seats down, it fits with 6⅛″ to spare at Opening width. Best orientation: straight.

What is the tightest part?

The limiting factor is Opening width, with +6⅛″ margin in seats down.

Do I need to fold the seats?

Results differ by configuration. Seats up is No and seats down is Yes.

Which loading orientation works best?

Straight is the best orientation for this result in seats down.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.

Does it fit with seats up or seats down?

Seats up: No (-5⅜″). Seats down: Yes (+6⅛″). Default selection follows YES > MAYBE > NO.

What do YES, MAYBE and NO mean here?

YES means there is at least 2⅜″ to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 2⅜″ to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with +6⅛″ margin.

How tight is this fit?

This result is in the good clearance band (+6⅛″ at Opening width).