KALLAX Shelf unit, white, 30 1/8x30 1/8″
+11⅝″ margin
All items that fit a Toyota C-HR 2020
Will fit in a ?
Yes, it will fit!
Good news: BRIMNES Cabinet with doors, white, 30 3/4x37 3/8″ should fit in a straight orientation in a Toyota C-HR 2020 with seats down.
Fit Details
With seats down, Good news - this package should fit, with 10⅞″ to spare at opening width when loading straight. We're about 95% confident in this estimate.
BRIMNES Cabinet with doors, white, 30 3/4x37 3/8″
Box: 39″ × 16¾″ × 6″ · 72 lb 7 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Oct 21, 2026
Package
Status
Limiting factor
Best orientation
Package #1
39″ × 16¾″ × 6″
Status:+10⅞″ to spare
Limited by
Limiting factor:Opening width
Best orientation:Straight
Vehicle limits
Opening width / height above sill
27½″ / 24¾″
Cargo width / height
37¾″ / 26⅜″
Cargo length seats up / down
30⅜″ / 62⅝″
Loading sill height
30⅜″
Toyota C-HR 2020
Measurements last checked and updated on Oct 21, 2026
Helpful tips
Use these loading tips to improve your chances of fitting BRIMNES Cabinet with doors, white, 30 3/4x37 3/8″ in Toyota C-HR 2020.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Keep a straight loading path
Keep the package straight and level while loading.
Other items to check in Toyota C-HR 2020
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Toyota C-HR 2020 boot
The C-HR's opening is narrower than its boot. It is 27½″ wide with 24¾″ of clear height above the loading sill, while the floor behind it stays 37¾″ wide at its narrowest. That sill sits 30⅜″ off the ground, and the floor is only 1⅝″ lower. Seats up, you get 30⅜″ of floor. Folding the rear seats adds 32¼″, a big gain, for 62⅝″ in total, though a box that passes the opening can still be too long for that floor. Bulky boxes are the poor match. Check every box against the opening before you think about the floor.
About the BRIMNES Cabinet with doors, white, 30 3/4x37 3/8″ package
Small box, serious weight. The BRIMNES cabinet packs 72 lb 7 oz into a single box of 39″ × 16¾″ × 6″, and something that compact and heavy is easy to underestimate. Lying flat, it sits on a patch of floor 39″ by 16¾″. The lift is where the care goes. Short as the box is, that weight is a lot to hold while you lean into the boot. Take it as a pair, knees bent and backs straight, and lower it gently all the way down rather than letting it drop the last bit.
Frequently asked questions
Find quick answers about fit for BRIMNES Cabinet with doors, white, 30 3/4x37 3/8″ in Toyota C-HR 2020, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will BRIMNES Cabinet with doors, white, 30 3/4x37 3/8″ fit in Toyota C-HR 2020?
Yes. With seats down, it fits with 10⅞″ to spare at Opening width. Best orientation: straight.
What is the tightest part?
The limiting factor is Opening width, with +10⅞″ margin in seats down.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Yes.
Which loading orientation works best?
Straight is the best orientation for this result in seats down.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.
Does it fit with seats up or seats down?
Seats up: No (-2⅞″). Seats down: Yes (+10⅞″). Default selection follows YES > MAYBE > NO.
What do YES, MAYBE and NO mean here?
YES means there is at least 2⅜″ to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 2⅜″ to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with +10⅞″ margin.
How tight is this fit?
This result is in the comfortable clearance band (+10⅞″ at Opening width).