Will fit in an ?

Maybe, it's a tight fit.

It might fit, but it's tight: PAX Wardrobe frame, white, 50x58x236 cm is borderline in a straight orientation in an Alfa Romeo Brera 2008 with seats up.

Alfa Romeo Brera 2008

Fit Details

With seats up, It's close. This package is a borderline fit at opening height (-1 cm), best loaded straight. See the Helpful tips section below for practical loading suggestions. We're about 75% confident in this estimate.

PAX Wardrobe frame, white, 50x58x236 cm

PAX Wardrobe frame, white, 50x58x236 cm

Box: 246 × 59 × 7 cm · 45.46 kg

Based on IKEA UK (United Kingdom).

Package dimensions last checked and updated on Aug 06, 2026

  • Package #1

    246 × 59 × 7 cm

    Status:-1 cm tight

    Limiting factor:Opening height

    Best orientation:Straight

Vehicle limits

Trunk limits for Alfa Romeo Brera 2008

Opening width / height

99 cm / 61 cm

Cargo width / height

84 cm / 89 cm

Cargo length seats up / down

95 cm / 152 cm

Loading sill height

90 cm

Alfa Romeo Brera 2008

Measurements last checked and updated on Sep 01, 2026

Helpful tips

Use these loading tips to improve your chances of fitting PAX Wardrobe frame, white, 50x58x236 cm in Alfa Romeo Brera 2008.

  • Manage opening height

    Keep the highest edge low at the trunk opening.

  • Keep a straight loading path

    Keep the package straight and level while loading.

  • Clear real-world obstacles

    Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.

About the Alfa Romeo Brera 2008 boot

The Brera gives you a letterbox: the opening is 99 cm wide but only 61 cm tall. Behind the seats you get 95 cm of floor, and folding the rear seats takes that to 152 cm, a gain of 57 cm. The floor narrows to 84 cm at its tightest, so a wide flat box has to go in at an angle. This boot handles long low loads better than tall ones. Plan for the sill: it sits 90 cm off the ground with a 28 cm drop to the floor, so lift high, rest the box on the sill, then let it down.

About the PAX Wardrobe frame, white, 50x58x236 cm package

PAX Wardrobe frame ships as a single flat panel: 245 cm long, 59 cm wide, 7 cm thick, close to the length of two adults laid end to end. The flatness helps, but the length is the problem since most cars top out around 180 cm of usable floor with the rear bench folded. You want an estate, a van, or a large SUV with a true flat load floor, otherwise you book delivery. If you do attempt it, slide the panel in flat along the centre line, protect the front edge with a blanket, and load it last so it sits on top.

Frequently asked questions

Find quick answers about fit for PAX Wardrobe frame, white, 50x58x236 cm in Alfa Romeo Brera 2008, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will PAX Wardrobe frame, white, 50x58x236 cm fit in Alfa Romeo Brera 2008?

Maybe. With seats up, this is a borderline fit at Opening height (-1 cm). Best orientation: straight.

What is the tightest part?

The limiting factor is Opening height, with -1 cm margin in seats up.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening height) with -1 cm margin.

Which loading orientation works best?

Straight is the best orientation for this result in seats up.

How confident is this result?

Confidence is 75 out of 100 based on available dimensions and margin tightness.

Does it fit with seats up or seats down?

Seats up: Maybe (-1 cm). Seats down: Maybe (-1 cm). Default selection follows YES > MAYBE > NO.

What can I try to make it work?

Use straight loading and focus on opening height. Keep the highest edge low at the trunk opening. Keep the package straight and level while loading.

What could change the result in real life?

Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.

How tight is this fit?

This result is in the very tight borderline band (-1 cm at Opening height).