HAUGA Chest of 3 drawers, white, 70x46x84 cm
+11 cm margin
Will fit in an ?
Maybe, it's a tight fit.
It might fit, but it's tight: PAX Wardrobe frame, white, 100x58x236 cm is borderline in a straight orientation in an Alfa Romeo Brera 2008 with seats up.
Fit Details
With seats up, It's close. This package is a borderline fit at opening height (-3 cm), best loaded straight. See the Helpful tips section below for practical loading suggestions. We're about 95% confident in this estimate.
PAX Wardrobe frame, white, 100x58x236 cm
Box: 245 × 61 × 8 cm · 55.03 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Aug 06, 2026
Package
Status
Limiting factor
Best orientation
Package #1
245 × 61 × 8 cm
Status:-3 cm tight
Limited by
Limiting factor:Opening height
Best orientation:Straight
Vehicle limits
Opening width / height
99 cm / 61 cm
Cargo width / height
84 cm / 89 cm
Cargo length seats up / down
95 cm / 152 cm
Loading sill height
90 cm
Alfa Romeo Brera 2008
Measurements last checked and updated on Sep 01, 2026
Helpful tips
Use these loading tips to improve your chances of fitting PAX Wardrobe frame, white, 100x58x236 cm in Alfa Romeo Brera 2008.
Manage opening height
Keep the highest edge low at the trunk opening.
Keep a straight loading path
Keep the package straight and level while loading.
Clear real-world obstacles
Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.
Alternatives that fit in Alfa Romeo Brera 2008
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Alfa Romeo Brera 2008 boot
The Brera gives you a letterbox: the opening is 99 cm wide but only 61 cm tall. Behind the seats you get 95 cm of floor, and folding the rear seats takes that to 152 cm, a gain of 57 cm. The floor narrows to 84 cm at its tightest, so a wide flat box has to go in at an angle. This boot handles long low loads better than tall ones. Plan for the sill: it sits 90 cm off the ground with a 28 cm drop to the floor, so lift high, rest the box on the sill, then let it down.
About the PAX Wardrobe frame, white, 100x58x236 cm package
The PAX 100 frame ships as one flat panel, 245 cm long, 61 cm wide and 8 cm thick. That 2.45 metre length is the wall: hatchbacks and small SUVs do not have the floor for it, even with the seats fully flat. An estate, a long SUV or a van is the right car. At 55 kg the panel is heavy, you need two people. Lay it on its 8 cm edge if your floor allows, or flat on a blanket. Keep a rigid sheet between the panel and any door frame, the laminate scratches on contact with metal trim.
Frequently asked questions
Find quick answers about fit for PAX Wardrobe frame, white, 100x58x236 cm in Alfa Romeo Brera 2008, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will PAX Wardrobe frame, white, 100x58x236 cm fit in Alfa Romeo Brera 2008?
Maybe. With seats up, this is a borderline fit at Opening height (-3 cm). Best orientation: straight.
What is the tightest part?
The limiting factor is Opening height, with -3 cm margin in seats up.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening height) with -3 cm margin.
Which loading orientation works best?
Straight is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.
Does it fit with seats up or seats down?
Seats up: Maybe (-3 cm). Seats down: Maybe (-3 cm). Default selection follows YES > MAYBE > NO.
What can I try to make it work?
Use straight loading and focus on opening height. Keep the highest edge low at the trunk opening. Keep the package straight and level while loading.
What could change the result in real life?
Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.
How tight is this fit?
This result is in the borderline band (-3 cm at Opening height).