Will fit in a ?

No, it won't fit.

It will not fit in this setup: PAX Wardrobe frame, white, 75x58x236 cm is too large for a VW Passat Variant 2024 with seats up.

VW Passat Variant 2024

Fit Details

With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 70.9 cm even with diagonal loading. We're about 95% confident in this estimate.

PAX Wardrobe frame, white, 75x58x236 cm

PAX Wardrobe frame, white, 75x58x236 cm

Box: 246 × 59 × 7 cm · 48.1 kg

Based on IKEA UK (United Kingdom).

Package dimensions last checked and updated on Jul 24, 2026

  • Package #1

    246 × 59 × 7 cm

    Status:70.9 cm short

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for VW Passat Variant 2024

Opening width / height

105 cm / 79 cm

Cargo width / height

101 cm / 88 cm

Cargo length seats up / down

113 cm / 201 cm

Loading sill height

64 cm

VW Passat Variant 2024

Measurements last checked and updated on Jul 25, 2026

Helpful tips

Use these loading tips to improve your chances of fitting PAX Wardrobe frame, white, 75x58x236 cm in VW Passat Variant 2024.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the VW Passat Variant 2024 boot

The Passat Variant is an estate, and its boot behaves like one. The opening is 105 cm wide and 79 cm tall, and the floor runs 113 cm with the seats up. Fold the rear bench and it extends to 201 cm, a gain of 88 cm, which is where this car earns its keep. That long flat floor takes flat-pack boxes and long, low loads happily, though the narrowest point is 101 cm, so very wide items still need a careful angle. The sill sits at 64 cm with a shallow 9 cm drop, so slide heavy boxes in rather than lift them over.

About the PAX Wardrobe frame, white, 75x58x236 cm package

The PAX wardrobe frame ships as a single 245 cm long carton, 59 cm wide and 7 cm thick. That length is the problem: very few cars carry a 2.45 m flat-pack with the seats up, and at 49.3 kg the carton wants two people to lift and a soft surface under it. An estate or a long-floor SUV with the rear seats folded is the realistic answer, or a hire van. Slide it in long edge first along the centre of the boot, slip a blanket under the corner, and ease it past the wheel arches.

On pickup day

No, in both seat positions. The white PAX frame is one 246 cm box, and it will not go into the Passat. Seats up it misses the 105 cm wide opening by 70.9 cm. Fold the rear bench and the 201 cm floor still leaves it 17.8 cm short, so dropping the seats does not save it. A frame this long wants a van, a roof rack with straps, or home delivery. If the car is fixed, book delivery and skip the struggle. This is one of the few loads a big estate boot simply cannot swallow.

Frequently asked questions

Find quick answers about fit for PAX Wardrobe frame, white, 75x58x236 cm in VW Passat Variant 2024, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will PAX Wardrobe frame, white, 75x58x236 cm fit in VW Passat Variant 2024?

No. With seats up, it is short by 70.9 cm at Opening width, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening width, with -70.9 cm margin in seats up.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -70.9 cm margin.

How tight is this fit?

This result is in the clear no-fit band (-70.9 cm at Opening width).

Does it fit with seats up or seats down?

Seats up: No (-70.9 cm). Seats down: No (-17.8 cm). Default selection follows YES > MAYBE > NO.

Why does it not fit?

The blocker is Opening width. The worst margin is -70.9 cm in seats up, so clearance is below the required buffer.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -70.9 cm around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.