
NORDEN Gateleg table, birch, 26/89/152x80 cm
+7.2 cm margin
No, it won't fit.

Fit Details

PAX Wardrobe frame, white, 75x58x236 cm
Box: 245 × 59 × 7 cm · 49.33 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Mar 25, 2026
Package
Status
Limiting factor
Best orientation
Package #1
245 × 59 × 7 cm
Status:108.5 cm short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits

Opening width / height
88 cm / 87 cm
Cargo width / height
101 cm / 104 cm
Cargo length seats up / down
68 cm / 133 cm
Loading sill height
68 cm
Toyota Yaris 2018
Measurements last checked and updated on Jul 15, 2026
Helpful tips
Use these loading tips to improve your chances of fitting PAX Wardrobe frame, white, 75x58x236 cm in Toyota Yaris 2018.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Toyota Yaris 2018
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Toyota Yaris 2018 boot
The Toyota Yaris gives you a compact hatchback boot. The opening is 88 cm wide and 87 cm tall, and the floor runs 68 cm deep with the seats up, enough for a weekly shop, a pushchair, or a few small boxes. Fold the rear bench and the floor extends to 133 cm, a gain of 65 cm, which nearly doubles what you can carry. Long loads like bed frames or wardrobe panels still overhang and will not go. You lift over a 68 cm sill then drop 17 cm into the well, so slide heavy boxes in rather than lower them by hand.
About the PAX Wardrobe frame, white, 75x58x236 cm package
The PAX wardrobe frame ships as a single 245 cm long carton, 59 cm wide and 7 cm thick. That length is the problem: very few cars carry a 2.45 m flat-pack with the seats up, and at 49.3 kg the carton wants two people to lift and a soft surface under it. An estate or a long-floor SUV with the rear seats folded is the realistic answer, or a hire van. Slide it in long edge first along the centre of the boot, slip a blanket under the corner, and ease it past the wheel arches.
On pickup day
The Yaris is the wrong car for this box. The PAX frame ships at 245 cm long, the boot opening measures 88 cm wide by 87 cm tall, and you end up 108.5 cm short with the rear seats up. Folding the bench returns 32.3 cm and brings the gap to 76.2 cm, which is still most of the box sitting outside. The folded floor tops out at 133 cm. Save yourself the trip and take the IKEA delivery, and measure your own boot before you rely on any of these numbers.
Frequently asked questions
Find quick answers about fit for PAX Wardrobe frame, white, 75x58x236 cm in Toyota Yaris 2018, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will PAX Wardrobe frame, white, 75x58x236 cm fit in Toyota Yaris 2018?
No. With seats up, it is short by 108.5 cm at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -108.5 cm margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -108.5 cm margin.
How tight is this fit?
This result is in the clear no-fit band (-108.5 cm at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-108.5 cm). Seats down: No (-76.2 cm). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -108.5 cm in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -108.5 cm around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.