HAUGA Chest of 3 drawers, white, 70x46x84 cm
+25.5 cm margin
WillPAX Wardrobe frame, white, 75x58x236 cmfit in aPeugeot 3008 2025?
No, it won't fit.
It will not fit in this setup: PAX Wardrobe frame, white, 75x58x236 cm is too large for a Peugeot 3008 2025 with seats up.
Fit Details
With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 80.7 cm even with diagonal loading. We're about 95% confident in this estimate.
PAX Wardrobe frame, white, 75x58x236 cm
Box: 245 × 59 × 7 cm · 49.33 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Mar 25, 2026
Package
Status
Limiting factor
Best orientation
Package #1
245 × 59 × 7 cm
Status:80.7 cm short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
102 cm / 78 cm
Cargo width / height
101 cm / 89 cm
Cargo length seats up / down
99 cm / 167 cm
Loading sill height
80 cm
Peugeot 3008 2025
Measurements last checked and updated on Jul 19, 2026
Helpful tips
Use these loading tips to improve your chances of fitting PAX Wardrobe frame, white, 75x58x236 cm in Peugeot 3008 2025.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Peugeot 3008 2025
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Peugeot 3008 2025 boot
The 3008 gives you a wide, square loading space. The tailgate opening measures 102 cm wide × 78 cm tall and the floor stays 101 cm across at its narrowest, so you keep almost full width right to the back. With the rear seats up you get 99 cm of floor, which suits boxed appliances and flat packs up to about a metre. Folding the bench adds 68 cm and takes you to 167 cm, the biggest single change you can make here. The sill sits 80 cm off the ground with an 11 cm drop to the floor, so lift high, then slide down and forward.
About the PAX Wardrobe frame, white, 75x58x236 cm package
The PAX wardrobe frame ships as a single 245 cm long carton, 59 cm wide and 7 cm thick. That length is the problem: very few cars carry a 2.45 m flat-pack with the seats up, and at 49.3 kg the carton wants two people to lift and a soft surface under it. An estate or a long-floor SUV with the rear seats folded is the realistic answer, or a hire van. Slide it in long edge first along the centre of the boot, slip a blanket under the corner, and ease it past the wheel arches.
On pickup day
Nothing about the 3008 fixes this box. The PAX frame arrives as one 245 cm package, and against a 102 cm boot opening you land 80.7 cm short with the seats upright. Folding the rear bench adds 38.6 cm of usable length and brings the shortfall to 42.1 cm, so the answer stays the same in both setups. The boot floor reaches 167 cm folded, which handles most flat packs but not a wardrobe frame. Plan for delivery or a hired van, and pull the parcel shelf out before you load anything else.
Frequently asked questions
Find quick answers about fit for PAX Wardrobe frame, white, 75x58x236 cm in Peugeot 3008 2025, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will PAX Wardrobe frame, white, 75x58x236 cm fit in Peugeot 3008 2025?
No. With seats up, it is short by 80.7 cm at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -80.7 cm margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -80.7 cm margin.
How tight is this fit?
This result is in the clear no-fit band (-80.7 cm at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-80.7 cm). Seats down: No (-42.1 cm). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -80.7 cm in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -80.7 cm around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.