KIVIK 3-seat sofa, Tibbleby beige/grey
+26 cm margin
WillPAX Wardrobe frame, white, 75x58x236 cmfit in aPeugeot 208 2020?
No, it won't fit.
It will not fit in this setup: PAX Wardrobe frame, white, 75x58x236 cm is too large for a Peugeot 208 2020 with seats up.
Fit Details
With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 109.2 cm even with diagonal loading. We're about 95% confident in this estimate.
PAX Wardrobe frame, white, 75x58x236 cm
Box: 245 × 59 × 7 cm · 49.33 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Mar 25, 2026
Package
Status
Limiting factor
Best orientation
Package #1
245 × 59 × 7 cm
Status:109.2 cm short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
86 cm / 75 cm
Cargo width / height
96 cm / 93 cm
Cargo length seats up / down
67 cm / 131 cm
Loading sill height
71 cm
Peugeot 208 2020
Measurements last checked and updated on Jun 23, 2026
Helpful tips
Use these loading tips to improve your chances of fitting PAX Wardrobe frame, white, 75x58x236 cm in Peugeot 208 2020.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Peugeot 208 2020
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Peugeot 208 2020 boot
The Peugeot 208 2020 gives you a compact boot with a narrow mouth. The opening is 86 cm wide by 75 cm tall, and the floor behind it runs 67 cm with the seats up. Drop the rear bench and the floor opens to 131 cm, a gain of 64 cm, which nearly doubles your usable length. Across the floor the narrow point is 96 cm. It takes weekly shopping and soft bags with ease, but a wide rigid box can snag on that 86 cm opening. The sill stands 71 cm high with a gentle 18 cm drop inside, so rest the load on the lip and push it in.
About the PAX Wardrobe frame, white, 75x58x236 cm package
The PAX wardrobe frame ships as a single 245 cm long carton, 59 cm wide and 7 cm thick. That length is the problem: very few cars carry a 2.45 m flat-pack with the seats up, and at 49.3 kg the carton wants two people to lift and a soft surface under it. An estate or a long-floor SUV with the rear seats folded is the realistic answer, or a hire van. Slide it in long edge first along the centre of the boot, slip a blanket under the corner, and ease it past the wheel arches.
On pickup day
This one is a clear no: a 245 cm PAX frame and a Peugeot 208 are not a match. Seats up, the box overshoots the 86 cm wide and 75 cm tall opening by 109.2 cm, even on the diagonal. Fold the rear bench and you still fall 76.6 cm short, because even the folded floor only reaches 131 cm. A flat-pack this long needs a van, a roof rack, or IKEA's delivery van, not a supermini boot. No tape measure is going to rescue a 76.6 cm gap, so book delivery or borrow something bigger for the day.
Frequently asked questions
Find quick answers about fit for PAX Wardrobe frame, white, 75x58x236 cm in Peugeot 208 2020, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will PAX Wardrobe frame, white, 75x58x236 cm fit in Peugeot 208 2020?
No. With seats up, it is short by 109.2 cm at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -109.2 cm margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -109.2 cm margin.
How tight is this fit?
This result is in the clear no-fit band (-109.2 cm at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-109.2 cm). Seats down: No (-76.6 cm). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -109.2 cm in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -109.2 cm around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.