NORDEN Gateleg table, birch, 26/89/152x80 cm
+15 cm margin
WillPAX Wardrobe frame, white, 75x58x236 cmfit in aHyundai Tucson 2025?
No, it won't fit.
It will not fit in this setup: PAX Wardrobe frame, white, 75x58x236 cm is too large for a Hyundai Tucson 2025 with seats up.
Fit Details
With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 85 cm even with diagonal loading. We're about 95% confident in this estimate.
PAX Wardrobe frame, white, 75x58x236 cm
Box: 245 × 59 × 7 cm · 49.33 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Mar 25, 2026
Package
Status
Limiting factor
Best orientation
Package #1
245 × 59 × 7 cm
Status:85 cm short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
102 cm / 73 cm
Cargo width / height
104 cm / 73 cm
Cargo length seats up / down
91 cm / 173 cm
Loading sill height
73 cm
Hyundai Tucson 2025
Measurements last checked and updated on Jun 25, 2026
Helpful tips
Use these loading tips to improve your chances of fitting PAX Wardrobe frame, white, 75x58x236 cm in Hyundai Tucson 2025.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Hyundai Tucson 2025
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Hyundai Tucson 2025 boot
The Tucson's boot is a roomy, square space that transforms when you fold the rear seats. Seats up, the floor runs 91 cm deep behind a 102 cm wide by 73 cm tall opening. Fold the bench and the floor reaches 173 cm, a gain of 82 cm, which is this boot's best feature. The floor stays a generous 104 cm across at its narrowest, so wide flat boxes lie flat with room to spare. The load lip sits level with the floor, no drop to heave over. Long flat-pack panels need the seats down, so plan your load around that fold.
About the PAX Wardrobe frame, white, 75x58x236 cm package
The PAX wardrobe frame ships as a single 245 cm long carton, 59 cm wide and 7 cm thick. That length is the problem: very few cars carry a 2.45 m flat-pack with the seats up, and at 49.3 kg the carton wants two people to lift and a soft surface under it. An estate or a long-floor SUV with the rear seats folded is the realistic answer, or a hire van. Slide it in long edge first along the centre of the boot, slip a blanket under the corner, and ease it past the wheel arches.
On pickup day
Another no in the Tucson, and a wide miss. The white PAX frame is 245 cm long, so with the seats up it overshoots the 102 cm wide and 73 cm tall opening by 85 cm, even turned diagonally. Folding the rear bench gives back 44.7 cm, but you are still 40.3 cm short, so it stays a no in both setups. A 245 cm box belongs in a van, on roof bars, or in an estate with the front passenger seat dropped flat. Measure if you like, though a gap of 40.3 cm is well past what real-world tolerances will close.
Frequently asked questions
Find quick answers about fit for PAX Wardrobe frame, white, 75x58x236 cm in Hyundai Tucson 2025, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will PAX Wardrobe frame, white, 75x58x236 cm fit in Hyundai Tucson 2025?
No. With seats up, it is short by 85 cm at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -85 cm margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -85 cm margin.
How tight is this fit?
This result is in the clear no-fit band (-85 cm at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-85 cm). Seats down: No (-40.3 cm). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -85 cm in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -85 cm around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.