Will fit in a ?

No, it won't fit.

It will not fit in this setup: PAX Wardrobe frame, white, 75x58x236 cm is too large for a Cupra Formentor VZ 2023 with seats up.

Cupra Formentor VZ 2023

Fit Details

With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 91.5 cm even with diagonal loading. We're about 95% confident in this estimate.

PAX Wardrobe frame, white, 75x58x236 cm

PAX Wardrobe frame, white, 75x58x236 cm

Box: 246 × 59 × 7 cm · 48.1 kg

Based on IKEA UK (United Kingdom).

Package dimensions last checked and updated on Jul 24, 2026

  • Package #1

    246 × 59 × 7 cm

    Status:91.5 cm short

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Cupra Formentor VZ 2023

Opening width / height

99 cm / 70 cm

Cargo width / height

100 cm / 81 cm

Cargo length seats up / down

81 cm / 159 cm

Sill to floor drop

11 cm

Cupra Formentor VZ 2023

Measurements last checked and updated on Jul 26, 2026

Helpful tips

Use these loading tips to improve your chances of fitting PAX Wardrobe frame, white, 75x58x236 cm in Cupra Formentor VZ 2023.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the Cupra Formentor VZ 2023 boot

The Cupra Formentor VZ gives you a compact performance SUV boot: an opening 99 cm wide × 70 cm tall, a floor 81 cm long with the seats up, and 100 cm across at its narrow point. Fold the rear bench and the floor stretches to 159 cm, a gain of 78 cm, so it nearly doubles in length once the seats drop. The tight point is that 99 cm opening. Wide or long loads go in on a diagonal, and tall boxes are capped by the 70 cm height. It takes medium cartons and folded flat-packs well, but not full-length wardrobe frames. Fold the seats first, feed long boxes corner in, and mind the 11 cm lip.

About the PAX Wardrobe frame, white, 75x58x236 cm package

The PAX wardrobe frame ships as a single 245 cm long carton, 59 cm wide and 7 cm thick. That length is the problem: very few cars carry a 2.45 m flat-pack with the seats up, and at 49.3 kg the carton wants two people to lift and a soft surface under it. An estate or a long-floor SUV with the rear seats folded is the realistic answer, or a hire van. Slide it in long edge first along the centre of the boot, slip a blanket under the corner, and ease it past the wheel arches.

On pickup day

The white PAX wardrobe frame does not fit the Cupra Formentor VZ, folded or not. Its longest box is 246 cm long and 59 cm wide, against a boot opening of only 99 cm, so seats up you are 91.5 cm short on a diagonal. Folding the rear bench claws back 40.7 cm and still leaves a 50.8 cm shortfall. No orientation gets a 246 cm frame into this car. Save yourself the lift, book delivery or a van, and keep the frame flat and edge-protected in transit.

Frequently asked questions

Find quick answers about fit for PAX Wardrobe frame, white, 75x58x236 cm in Cupra Formentor VZ 2023, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will PAX Wardrobe frame, white, 75x58x236 cm fit in Cupra Formentor VZ 2023?

No. With seats up, it is short by 91.5 cm at Opening width, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening width, with -91.5 cm margin in seats up.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -91.5 cm margin.

How tight is this fit?

This result is in the clear no-fit band (-91.5 cm at Opening width).

Does it fit with seats up or seats down?

Seats up: No (-91.5 cm). Seats down: No (-50.8 cm). Default selection follows YES > MAYBE > NO.

Why does it not fit?

The blocker is Opening width. The worst margin is -91.5 cm in seats up, so clearance is below the required buffer.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -91.5 cm around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.