All items that fit a Toyota C-HR 2020

Will fit in a ?

No, it won't fit.

It will not fit in this setup: PAX Wardrobe frame, grey-beige, 75x58x236 cm is too large for a Toyota C-HR 2020 with seats up.

Toyota C-HR 2020

Fit Details

With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 105.4 cm even with diagonal loading. We're about 95% confident in this estimate.

PAX Wardrobe frame, grey-beige, 75x58x236 cm

PAX Wardrobe frame, grey-beige, 75x58x236 cm

Box: 246 × 59 × 7 cm · 36.92 kg

Based on IKEA UK (United Kingdom).

Package dimensions last checked and updated on Oct 21, 2026

  • Package #1

    246 × 59 × 7 cm

    Status:105.4 cm short

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Toyota C-HR 2020

Opening width / height above sill

70 cm / 63 cm

Cargo width / height

96 cm / 67 cm

Cargo length seats up / down

77 cm / 159 cm

Loading sill height

77 cm

Toyota C-HR 2020

Measurements last checked and updated on Oct 21, 2026

Helpful tips

Use these loading tips to improve your chances of fitting PAX Wardrobe frame, grey-beige, 75x58x236 cm in Toyota C-HR 2020.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the Toyota C-HR 2020 boot

The C-HR's boot is wider inside than at the tailgate. The opening is 70 cm wide, while the floor stays 96 cm wide at its narrowest, so for width the opening is the limit. The loading sill sits 77 cm off the ground. Above it you have 63 cm of clear height, and the floor is only 4 cm lower than the sill. With the rear seats up the floor runs 77 cm. Folding the seats adds 82 cm, for 159 cm of floor, but a box that passes the opening can still be too long for it. Wide, bulky boxes suit it least. Measure each box against the 70 cm opening first.

About the PAX Wardrobe frame, grey-beige, 75x58x236 cm package

A wardrobe frame this tall arrives as one long, flat box: 246 cm × 59 cm × 7 cm, at 36.92 kg. The weak point is the ends. On a box this long they are the first thing to hit a wall or a doorway as you turn, and a crushed corner can mean a chipped panel inside. Lying flat and straight, it needs 246 cm of floor, end to end. Before you lift it, tape folded cardboard over both ends, so the knocks land on something you can throw away.

On pickup day

A 70 cm wide boot opening rules the Toyota C-HR 2020 out for the grey-beige PAX frame: with the rear seats up, the box is 105.4 cm too big there. Folding the seats buys 82 cm of floor, but on its side at an angle across the floor it is still 58.1 cm too big, now at the folded floor length of 159 cm. Line up delivery to your door instead. Neither set-up comes close, so you need not try it in the car park.

Frequently asked questions

Find quick answers about fit for PAX Wardrobe frame, grey-beige, 75x58x236 cm in Toyota C-HR 2020, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will PAX Wardrobe frame, grey-beige, 75x58x236 cm fit in Toyota C-HR 2020?

No. With seats up, it is short by 105.4 cm at Opening width, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening width, with -105.4 cm margin in seats up.

Why does it not fit?

The blocker is Opening width: with seats up, the box is 105.4 cm bigger than the space there.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -105.4 cm around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.

Does it fit with seats up or seats down?

Seats up: No (-105.4 cm). Seats down: No (-58.1 cm). Default selection follows YES > MAYBE > NO.

What do YES, MAYBE and NO mean here?

YES means there is at least 6 cm to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 6 cm to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -105.4 cm margin.

How tight is this fit?

This result is in the clear no-fit band (-105.4 cm at Opening width).