NORDEN Gateleg table, birch, 26/89/152x80 cm
+15 cm margin
WillPAX Wardrobe frame, grey-beige, 75x58x236 cmfit in aHyundai Tucson 2025?
No, it won't fit.
It will not fit in this setup: PAX Wardrobe frame, grey-beige, 75x58x236 cm is too large for a Hyundai Tucson 2025 with seats up.
Fit Details
With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 85.7 cm even with diagonal loading. We're about 95% confident in this estimate.
PAX Wardrobe frame, grey-beige, 75x58x236 cm
Box: 246 × 59 × 7 cm · 36.92 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Mar 25, 2026
Package
Status
Limiting factor
Best orientation
Package #1
246 × 59 × 7 cm
Status:85.7 cm short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
102 cm / 73 cm
Cargo width / height
104 cm / 73 cm
Cargo length seats up / down
91 cm / 173 cm
Loading sill height
73 cm
Hyundai Tucson 2025
Measurements last checked and updated on Jun 25, 2026
Helpful tips
Use these loading tips to improve your chances of fitting PAX Wardrobe frame, grey-beige, 75x58x236 cm in Hyundai Tucson 2025.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Hyundai Tucson 2025
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Hyundai Tucson 2025 boot
The Tucson's boot is a roomy, square space that transforms when you fold the rear seats. Seats up, the floor runs 91 cm deep behind a 102 cm wide by 73 cm tall opening. Fold the bench and the floor reaches 173 cm, a gain of 82 cm, which is this boot's best feature. The floor stays a generous 104 cm across at its narrowest, so wide flat boxes lie flat with room to spare. The load lip sits level with the floor, no drop to heave over. Long flat-pack panels need the seats down, so plan your load around that fold.
About the PAX Wardrobe frame, grey-beige, 75x58x236 cm package
The grey-beige PAX wardrobe frame is one rigid carton, 246 cm long, 59 cm wide, 7 cm thick. The length is what makes it a transport problem. A 2.46 m flat-pack will not sit inside most boots with seats up, even on a diagonal. You want an estate or a long-floor SUV with the rear bench folded and the front passenger seat slid forward, or a hire van. Lift it long edge first, set the corner on a folded blanket, and slide it the full length of the load bay before you close the tailgate.
On pickup day
No fit here. The PAX frame measures 246 cm × 59 cm × 7 cm, and on the diagonal it runs 85.7 cm past the Tucson boot opening with the seats up. Fold the rear seats and you recover 44.8 cm, yet you are left 40.9 cm short, so the box stays on the pavement either way. The opening, 102 cm wide and 73 cm tall, is the wall, not the cargo floor behind it. Measure your own boot before you set off, because trim and the parcel shelf quietly shrink the space.
Frequently asked questions
Find quick answers about fit for PAX Wardrobe frame, grey-beige, 75x58x236 cm in Hyundai Tucson 2025, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will PAX Wardrobe frame, grey-beige, 75x58x236 cm fit in Hyundai Tucson 2025?
No. With seats up, it is short by 85.7 cm at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -85.7 cm margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -85.7 cm margin.
How tight is this fit?
This result is in the clear no-fit band (-85.7 cm at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-85.7 cm). Seats down: No (-40.9 cm). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -85.7 cm in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -85.7 cm around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.