Will fit in an ?

No, it won't fit.

It will not fit in this setup: PAX Wardrobe frame, grey-beige, 75x58x236 cm is too large for an Audi Q3 2019 with seats up.

Audi Q3 2019

Fit Details

With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 74.3 cm even with diagonal loading. We're about 95% confident in this estimate.

PAX Wardrobe frame, grey-beige, 75x58x236 cm

PAX Wardrobe frame, grey-beige, 75x58x236 cm

Box: 246 × 59 × 7 cm · 36.92 kg

Based on IKEA UK (United Kingdom).

Package dimensions last checked and updated on Aug 06, 2026

  • Package #1

    246 × 59 × 7 cm

    Status:74.3 cm short

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Audi Q3 2019

Opening width / height

112 cm / 78 cm

Cargo width / height

100 cm / 87 cm

Cargo length seats up / down

90 cm / 166 cm

Loading sill height

75 cm

Audi Q3 2019

Measurements last checked and updated on Jul 31, 2026

Helpful tips

Use these loading tips to improve your chances of fitting PAX Wardrobe frame, grey-beige, 75x58x236 cm in Audi Q3 2019.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the Audi Q3 2019 boot

The Audi Q3 gives you a wide, square boot mouth: 112 cm across and 78 cm tall, so most flat-pack cartons clear the opening with the seats up. Behind them the floor runs 90 cm, and folding the rear bench stretches that to 166 cm, a gain of 76 cm that turns a school-run boot into a proper load bay. The floor stays 100 cm wide at its narrowest, so wide boxes sit flat. The catch is the lip: at 75 cm the sill is a high lift, with a 9 cm drop to the floor. Slide heavy boxes in on their edge rather than lowering them straight down.

About the PAX Wardrobe frame, grey-beige, 75x58x236 cm package

The grey-beige PAX wardrobe frame is one rigid carton, 246 cm long, 59 cm wide, 7 cm thick. The length is what makes it a transport problem. A 2.46 m flat-pack will not sit inside most boots with seats up, even on a diagonal. You want an estate or a long-floor SUV with the rear bench folded and the front passenger seat slid forward, or a hire van. Lift it long edge first, set the corner on a folded blanket, and slide it the full length of the load bay before you close the tailgate.

On pickup day

You will not get this box into a Q3: even the best diagonal with the seats up falls 74.3 cm short. It is a single 246 cm package meeting a boot mouth of 112 cm wide by 78 cm tall. Drop the rear bench and the gap shrinks by 41.7 cm to 32.6 cm, which is still a clear no. Save yourself the car park experiment and book delivery, or fetch it with a van. A tape measure tells the same story in ten seconds: openings vary by a centimetre or two in the real world, and these figures were last checked against IKEA's listed package size.

Frequently asked questions

Find quick answers about fit for PAX Wardrobe frame, grey-beige, 75x58x236 cm in Audi Q3 2019, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will PAX Wardrobe frame, grey-beige, 75x58x236 cm fit in Audi Q3 2019?

No. With seats up, it is short by 74.3 cm at Opening width, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening width, with -74.3 cm margin in seats up.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -74.3 cm margin.

How tight is this fit?

This result is in the clear no-fit band (-74.3 cm at Opening width).

Does it fit with seats up or seats down?

Seats up: No (-74.3 cm). Seats down: No (-32.6 cm). Default selection follows YES > MAYBE > NO.

Why does it not fit?

The blocker is Opening width. The worst margin is -74.3 cm in seats up, so clearance is below the required buffer.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -74.3 cm around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.