NORDEN Gateleg table, birch, 26/89/152x80 cm
0 cm margin
Will fit in an ?
No, it won't fit.
It will not fit in this setup: PAX Wardrobe frame, grey-beige, 75x58x236 cm is too large for an Alfa Romeo Giulietta Turismo 2010 with seats up.
Fit Details
With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 113.6 cm even with diagonal loading. We're about 95% confident in this estimate.
PAX Wardrobe frame, grey-beige, 75x58x236 cm
Box: 246 × 59 × 7 cm · 36.92 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Aug 06, 2026
Package
Status
Limiting factor
Best orientation
Package #1
246 × 59 × 7 cm
Status:113.6 cm short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
81 cm / 76 cm
Cargo width / height
102 cm / 97 cm
Cargo length seats up / down
77 cm / 147 cm
Loading sill height
78 cm
Alfa Romeo Giulietta Turismo 2010
Measurements last checked and updated on Sep 01, 2026
Helpful tips
Use these loading tips to improve your chances of fitting PAX Wardrobe frame, grey-beige, 75x58x236 cm in Alfa Romeo Giulietta Turismo 2010.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Alfa Romeo Giulietta Turismo 2010
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Alfa Romeo Giulietta Turismo 2010 boot
The Giulietta Turismo boot is wider inside than it is at the door: 102 cm across the floor, but an opening of 81 cm wide by 76 cm tall. That mismatch is the thing to plan around, because anything that suits the floor still has to pass the mouth. Behind the seats you have 77 cm of length, which is a shopping boot. Fold the bench and you get 147 cm, a gain of 70 cm. Medium boxes and soft loads suit it best. Feed a long flat pack through the narrow mouth at an angle, corner first.
About the PAX Wardrobe frame, grey-beige, 75x58x236 cm package
The grey-beige PAX wardrobe frame is one rigid carton, 246 cm long, 59 cm wide, 7 cm thick. The length is what makes it a transport problem. A 2.46 m flat-pack will not sit inside most boots with seats up, even on a diagonal. You want an estate or a long-floor SUV with the rear bench folded and the front passenger seat slid forward, or a hire van. Lift it long edge first, set the corner on a folded blanket, and slide it the full length of the load bay before you close the tailgate.
Frequently asked questions
Find quick answers about fit for PAX Wardrobe frame, grey-beige, 75x58x236 cm in Alfa Romeo Giulietta Turismo 2010, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will PAX Wardrobe frame, grey-beige, 75x58x236 cm fit in Alfa Romeo Giulietta Turismo 2010?
No. With seats up, it is short by 113.6 cm at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -113.6 cm margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -113.6 cm margin.
How tight is this fit?
This result is in the clear no-fit band (-113.6 cm at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-113.6 cm). Seats down: No (-77.3 cm). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -113.6 cm in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -113.6 cm around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.