HAUGA Chest of 3 drawers, white, 70x46x84 cm
+5.5 cm margin
WillPAX Wardrobe frame, dark grey, 75x58x236 cmfit in aPeugeot 308 2022?
No, it won't fit.
It will not fit in this setup: PAX Wardrobe frame, dark grey, 75x58x236 cm is too large for a Peugeot 308 2022 with seats up.
Fit Details
With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 86.7 cm even with diagonal loading. We're about 95% confident in this estimate.
PAX Wardrobe frame, dark grey, 75x58x236 cm
Box: 245 × 59 × 7 cm · 47.38 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Mar 25, 2026
Package
Status
Limiting factor
Best orientation
Package #1
245 × 59 × 7 cm
Status:86.7 cm short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
96 cm / 74 cm
Cargo width / height
82 cm / 91 cm
Cargo length seats up / down
78 cm / 148 cm
Loading sill height
70 cm
Peugeot 308 2022
Measurements last checked and updated on Jul 06, 2026
Helpful tips
Use these loading tips to improve your chances of fitting PAX Wardrobe frame, dark grey, 75x58x236 cm in Peugeot 308 2022.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Peugeot 308 2022
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Peugeot 308 2022 boot
The Peugeot 308 gives you a hatchback boot that is short but usefully deep. The opening is 96 cm wide by 74 cm tall, and the floor runs 78 cm with the seats up, stretching to 148 cm once you fold the rear bench, a gain of 70 cm. The narrow point of the floor is 82 cm across, so wide flat loads sit fine, but anything past 78 cm long needs the seats down. The load lip sits 70 cm off the ground with a 17 cm drop, so heavy boxes lift in then settle low. It takes suitcases and boxed furniture well, long flat-pack less so. Fold the seats before you load, not halfway through.
About the PAX Wardrobe frame, dark grey, 75x58x236 cm package
The PAX 75 frame ships as a single flat panel, 245 cm long, 59 cm wide and 7 cm thick. The length is the issue: 2.45 metres rules out almost every hatchback and most compact SUVs, even with the seats down. You need an estate with a flat floor, a long SUV like a RAV4 or X5, or a van. At 47.4 kg the panel is heavy enough that two people should lift it together. Load it diagonally if your floor is borderline, and lay a blanket underneath, the laminate edges scratch on rough boot liners.
Frequently asked questions
Find quick answers about fit for PAX Wardrobe frame, dark grey, 75x58x236 cm in Peugeot 308 2022, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will PAX Wardrobe frame, dark grey, 75x58x236 cm fit in Peugeot 308 2022?
No. With seats up, it is short by 86.7 cm at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -86.7 cm margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -86.7 cm margin.
How tight is this fit?
This result is in the clear no-fit band (-86.7 cm at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-86.7 cm). Seats down: No (-48.1 cm). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -86.7 cm in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -86.7 cm around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.