HAUGA Chest of 3 drawers, white, 70x46x84 cm
+38 cm margin
WillNORDLI Chest of 7 drawers, white, 120x76 cmfit in aToyota Yaris 2018?
Yes, it will fit!
Good news: NORDLI Chest of 7 drawers, white, 120x76 cm should fit diagonally in a Toyota Yaris 2018 with seats down.
Fit Details
With seats down, Good news - this package should fit. You have about +4.8 cm of clearance at opening width when loading diagonal. We're about 95% confident in this estimate.
NORDLI Chest of 7 drawers, white, 120x76 cm
Box: 130 × 48 × 8 cm · 16.35 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Jun 17, 2026
Package
Status
Limiting factor
Best orientation
Package #1
130 × 48 × 8 cm
Status:+4.8 cm margin
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
88 cm / 87 cm
Cargo width / height
101 cm / 104 cm
Cargo length seats up / down
68 cm / 133 cm
Loading sill height
68 cm
Toyota Yaris 2018
Measurements last checked and updated on Jul 15, 2026
Helpful tips
Use these loading tips to improve your chances of fitting NORDLI Chest of 7 drawers, white, 120x76 cm in Toyota Yaris 2018.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Clear real-world obstacles
Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.
Other items to check in Toyota Yaris 2018
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Toyota Yaris 2018 boot
The Toyota Yaris gives you a compact hatchback boot. The opening is 88 cm wide and 87 cm tall, and the floor runs 68 cm deep with the seats up, enough for a weekly shop, a pushchair, or a few small boxes. Fold the rear bench and the floor extends to 133 cm, a gain of 65 cm, which nearly doubles what you can carry. Long loads like bed frames or wardrobe panels still overhang and will not go. You lift over a 68 cm sill then drop 17 cm into the well, so slide heavy boxes in rather than lower them by hand.
About the NORDLI Chest of 7 drawers, white, 120x76 cm package
The NORDLI chest of seven drawers ships in four flat cartons, the largest 130 cm long, 48 cm wide and 8 cm thick. The boxes are slim and modest in length, but four of them stack up: combined weight is 76.8 kg, so plan two people. Most hatchbacks with the rear bench folded, any estate, and any SUV will take the load. Slide the longest carton in first along the centre of the floor, stack the rest with the heaviest underneath, and keep a blanket between the boxes to stop them sliding on the brake.
Frequently asked questions
Find quick answers about fit for NORDLI Chest of 7 drawers, white, 120x76 cm in Toyota Yaris 2018, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will NORDLI Chest of 7 drawers, white, 120x76 cm fit in Toyota Yaris 2018?
Yes. With seats down, it fits with +4.8 cm at Opening width. Best orientation: diagonal.
What is the tightest part?
The limiting factor is Opening width, with +4.8 cm margin in seats down.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with +4.8 cm around the limiting point.
What could change the result in real life?
Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.
How tight is this fit?
This result is in the tight positive clearance band (+4.8 cm at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-27.2 cm). Seats down: Yes (+4.8 cm). Default selection follows YES > MAYBE > NO.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Yes.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with +4.8 cm margin.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats down.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.