Willfit in a?

No, it won't fit.

It will not fit in this setup: NORDLI Bed frame with storage, white, 140x200 cm is too large for a Toyota RAV4 2024 with seats up.

Toyota RAV4 2024

Fit Details

With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 52.4 cm even with diagonal loading. We're about 95% confident in this estimate.

NORDLI Bed frame with storage, white, 140x200 cm

NORDLI Bed frame with storage, white, 140x200 cm

Box: 207 × 39 × 10 cm · 26.45 kg

Based on IKEA UK (United Kingdom).

Package dimensions last checked and updated on Jun 17, 2026

  • Package #1

    207 × 39 × 10 cm

    Status:52.4 cm short

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Toyota RAV4 2024

Opening width / height

104 cm / 87 cm

Cargo width / height

100 cm / 92 cm

Cargo length seats up / down

101 cm / 181 cm

Loading sill height

69 cm

Toyota RAV4 2024

Measurements last checked and updated on Mar 10, 2026

Helpful tips

Use these loading tips to improve your chances of fitting NORDLI Bed frame with storage, white, 140x200 cm in Toyota RAV4 2024.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the Toyota RAV4 2024 boot

The RAV4 2024 is the easy case in this catalogue. The opening runs 104 cm wide by 87 cm tall, the boot floor measures 101 cm long with the seats up and 181 cm folded, and the cargo width stays a consistent 100 cm right back to the rear seats. The sill is a low 69 cm with a 5 cm drop, so you load close to the ground. This boot swallows mid-size flat packs upright, multi-pack loads side by side, and most coffee tables seats up. Anything past 1.8 m still needs the bench folded.

About the NORDLI Bed frame with storage, white, 140x200 cm package

The NORDLI 140 bed comes as five flat-pack boxes, with the longest at 207 cm by 39 cm and 10 cm thick. Total weight runs to 120.3 kg, so this is a two-person lift even when split across packages. The long box is the awkward one: it needs a boot floor over 2 metres or a strong diagonal angle through the opening. An estate, a deep-load SUV or a van handles the set comfortably. Load the long box first, flat on a blanket, then pack the four smaller packages around it to stop sliding.

On pickup day

With the seats up your 207 cm NORDLI headboard is 52.4 cm short of the RAV4 opening on a diagonal, so it does not load. Fold the rear bench and the floor goes from 101 cm to 181 cm, but the opening still leaves a 5 cm shortfall, so it stays a no even after folding. On pickup day, plan for delivery or borrow a van. If you must try, bring blankets and a friend, and verify the opening width yourself with a tape, since trim and bumper protectors can shave a centimetre or two off the printed figure.

Frequently asked questions

Find quick answers about fit for NORDLI Bed frame with storage, white, 140x200 cm in Toyota RAV4 2024, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will NORDLI Bed frame with storage, white, 140x200 cm fit in Toyota RAV4 2024?

No. With seats up, it is short by 52.4 cm at Opening width, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening width, with -52.4 cm margin in seats up.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -52.4 cm margin.

How tight is this fit?

This result is in the clear no-fit band (-52.4 cm at Opening width).

Does it fit with seats up or seats down?

Seats up: No (-52.4 cm). Seats down: No (-5 cm). Default selection follows YES > MAYBE > NO.

Why does it not fit?

The blocker is Opening width. The worst margin is -52.4 cm in seats up, so clearance is below the required buffer.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -52.4 cm around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.