BRIMNES Bed frame with storage, white/Luröy, Standard Double
+16.6 cm margin
WillNORDLI Bed frame with storage, white, 140x200 cmfit in aToyota Corolla 2019?
No, it won't fit.
It will not fit in this setup: NORDLI Bed frame with storage, white, 140x200 cm is too large for a Toyota Corolla 2019 with seats up.
Fit Details
With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 49.9 cm even with diagonal loading. We're about 95% confident in this estimate.
NORDLI Bed frame with storage, white, 140x200 cm
Box: 207 × 39 × 10 cm · 26.45 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Jun 17, 2026
Package
Status
Limiting factor
Best orientation
Package #1
207 × 39 × 10 cm
Status:49.9 cm short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
99 cm / 77 cm
Cargo width / height
67 cm / 96 cm
Cargo length seats up / down
81 cm / 152 cm
Loading sill height
73 cm
Toyota Corolla 2019
Measurements last checked and updated on Mar 10, 2026
Helpful tips
Use these loading tips to improve your chances of fitting NORDLI Bed frame with storage, white, 140x200 cm in Toyota Corolla 2019.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Toyota Corolla 2019
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Toyota Corolla 2019 boot
The Corolla 2019 boot is a sedan-style space: an 81 cm floor with the seats up, a 67 cm narrow point at the wheel arches, and an opening 99 cm wide by 77 cm tall. Folding the rear bench gains you a useful 71 cm, taking the floor to 152 cm. The sill sits high at 73 cm with a 19 cm drop to the load floor, so heavy boxes need lifting clean over the lip. This boot handles small to mid-size flat packs and shopping well. Anything past 90 cm needs the seats down and a careful slide.
About the NORDLI Bed frame with storage, white, 140x200 cm package
The NORDLI 140 bed comes as five flat-pack boxes, with the longest at 207 cm by 39 cm and 10 cm thick. Total weight runs to 120.3 kg, so this is a two-person lift even when split across packages. The long box is the awkward one: it needs a boot floor over 2 metres or a strong diagonal angle through the opening. An estate, a deep-load SUV or a van handles the set comfortably. Load the long box first, flat on a blanket, then pack the four smaller packages around it to stop sliding.
On pickup day
The NORDLI bed splits across five cartons, the longest of which is 207 cm. The Corolla opens 99 cm wide. On the diagonal you are short by 49.9 cm seats up and only by 6.9 cm with the rear bench folded, a real near miss but still a no. The folded floor stretches to 152 cm, well under 207. The cleanest plan is to take the four smaller cartons in the car and book IKEA delivery for the long one. Re-measure the longest carton at the store before driving over.
Frequently asked questions
Find quick answers about fit for NORDLI Bed frame with storage, white, 140x200 cm in Toyota Corolla 2019, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will NORDLI Bed frame with storage, white, 140x200 cm fit in Toyota Corolla 2019?
No. With seats up, it is short by 49.9 cm at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -49.9 cm margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -49.9 cm margin.
How tight is this fit?
This result is in the clear no-fit band (-49.9 cm at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-49.9 cm). Seats down: No (-6.9 cm). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -49.9 cm in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -49.9 cm around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.