Willfit in a?

No, it won't fit.

It will not fit in this setup: NORDLI Bed frame with storage, white, 140x200 cm is too large for a Kia Sportage 2023 with seats up.

Kia Sportage 2023

Fit Details

With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 58.5 cm even with diagonal loading. We're about 95% confident in this estimate.

NORDLI Bed frame with storage, white, 140x200 cm

NORDLI Bed frame with storage, white, 140x200 cm

Box: 207 × 39 × 10 cm · 26.45 kg

Based on IKEA UK (United Kingdom).

Package dimensions last checked and updated on Jun 17, 2026

  • Package #1

    207 × 39 × 10 cm

    Status:58.5 cm short

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Kia Sportage 2023

Opening width / height

105 cm / 73 cm

Cargo width / height

104 cm / 73 cm

Cargo length seats up / down

90 cm / 169 cm

Loading sill height

72 cm

Kia Sportage 2023

Measurements last checked and updated on Mar 26, 2026

Helpful tips

Use these loading tips to improve your chances of fitting NORDLI Bed frame with storage, white, 140x200 cm in Kia Sportage 2023.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the Kia Sportage 2023 boot

The Sportage 2023 gives you a flat, wide loading floor: 90 cm with the seats up, 169 cm folded, and a steady 104 cm width front to back. The opening is broad at 105 cm but only 73 cm tall, so big square boxes need to go in flat. Sill height is 72 cm with no drop to the load floor, which means you slide cargo straight in across one continuous surface. This boot is a strong fit for long flat packs once you fold the bench, and for paired multi-package loads. Tall upright items are the weak point.

About the NORDLI Bed frame with storage, white, 140x200 cm package

The NORDLI 140 bed comes as five flat-pack boxes, with the longest at 207 cm by 39 cm and 10 cm thick. Total weight runs to 120.3 kg, so this is a two-person lift even when split across packages. The long box is the awkward one: it needs a boot floor over 2 metres or a strong diagonal angle through the opening. An estate, a deep-load SUV or a van handles the set comfortably. Load the long box first, flat on a blanket, then pack the four smaller packages around it to stop sliding.

On pickup day

With the seats up your 207 cm NORDLI headboard misses the Sportage opening by 58.5 cm on the diagonal, so it does not load. Fold the rear bench and the floor extends from 90 cm to 169 cm, but the opening is still 14.7 cm short, so this stays a no. The practical move on pickup day is to book IKEA delivery or borrow a van. The 169 cm folded length is too short for the headboard alone, and the 105 cm opening rules out any diagonal trick. Verify your real boot width before you leave, parcel shelves and load liners eat a centimetre or two.

Frequently asked questions

Find quick answers about fit for NORDLI Bed frame with storage, white, 140x200 cm in Kia Sportage 2023, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will NORDLI Bed frame with storage, white, 140x200 cm fit in Kia Sportage 2023?

No. With seats up, it is short by 58.5 cm at Opening width, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening width, with -58.5 cm margin in seats up.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -58.5 cm margin.

How tight is this fit?

This result is in the clear no-fit band (-58.5 cm at Opening width).

Does it fit with seats up or seats down?

Seats up: No (-58.5 cm). Seats down: No (-14.7 cm). Default selection follows YES > MAYBE > NO.

Why does it not fit?

The blocker is Opening width. The worst margin is -58.5 cm in seats up, so clearance is below the required buffer.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -58.5 cm around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.