BRIMNES Bed frame with storage, white/Luröy, Standard Double
+16.6 cm margin
WillNORDLI Bed frame with storage, white, 160x200 cmfit in aToyota Corolla 2019?
No, it won't fit.
It will not fit in this setup: NORDLI Bed frame with storage, white, 160x200 cm is too large for a Toyota Corolla 2019 with seats up.
Fit Details
With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 49.9 cm even with diagonal loading. We're about 95% confident in this estimate.
NORDLI Bed frame with storage, white, 160x200 cm
Box: 207 × 39 × 10 cm · 26.75 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Jun 17, 2026
Package
Status
Limiting factor
Best orientation
Package #1
207 × 39 × 10 cm
Status:49.9 cm short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
99 cm / 77 cm
Cargo width / height
67 cm / 96 cm
Cargo length seats up / down
81 cm / 152 cm
Loading sill height
73 cm
Toyota Corolla 2019
Measurements last checked and updated on Mar 10, 2026
Helpful tips
Use these loading tips to improve your chances of fitting NORDLI Bed frame with storage, white, 160x200 cm in Toyota Corolla 2019.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Toyota Corolla 2019
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Toyota Corolla 2019 boot
The Corolla 2019 boot is a sedan-style space: an 81 cm floor with the seats up, a 67 cm narrow point at the wheel arches, and an opening 99 cm wide by 77 cm tall. Folding the rear bench gains you a useful 71 cm, taking the floor to 152 cm. The sill sits high at 73 cm with a 19 cm drop to the load floor, so heavy boxes need lifting clean over the lip. This boot handles small to mid-size flat packs and shopping well. Anything past 90 cm needs the seats down and a careful slide.
About the NORDLI Bed frame with storage, white, 160x200 cm package
The NORDLI bed frame with storage comes as five flat packs and totals 123.5 kg: a serious load. The largest pack is 207 cm long, 39 cm wide, 10 cm thick, and that long box drives every fit decision. Hatchbacks need the rear bench folded and the diagonal route across the cabin. Estates, large SUVs, and vans take it comfortably. Load the long pack first along the floor, then stack the four shorter cartons on top in size order. Bring a friend and a pair of gloves.
On pickup day
In a Corolla, the longest NORDLI box does not fit through the boot opening. The longest package is 207 cm and the opening is 99 cm, so on the diagonal you are 49.9 cm short with the seats up. Folding the rear bench takes the floor from 81 cm to 152 cm and the gap closes to 6.9 cm, almost there, but still NO. The narrow 67 cm at the rear limits angle as well. Five packages mean multiple trips or a bigger car. Tape-measure the opening on your trim, last-checked figures only.
Frequently asked questions
Find quick answers about fit for NORDLI Bed frame with storage, white, 160x200 cm in Toyota Corolla 2019, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will NORDLI Bed frame with storage, white, 160x200 cm fit in Toyota Corolla 2019?
No. With seats up, it is short by 49.9 cm at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -49.9 cm margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -49.9 cm margin.
How tight is this fit?
This result is in the clear no-fit band (-49.9 cm at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-49.9 cm). Seats down: No (-6.9 cm). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -49.9 cm in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -49.9 cm around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.