Willfit in a?

No, it won't fit.

It will not fit in this setup: NORDLI Bed frame with storage, white, 160x200 cm is too large for a Renault Captur 2024 with seats up.

Renault Captur 2024

Fit Details

With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 79.3 cm even with diagonal loading. We're about 95% confident in this estimate.

NORDLI Bed frame with storage, white, 160x200 cm

NORDLI Bed frame with storage, white, 160x200 cm

Box: 207 × 39 × 10 cm · 26.75 kg

Based on IKEA UK (United Kingdom).

Package dimensions last checked and updated on Jun 17, 2026

  • Package #1

    207 × 39 × 10 cm

    Status:79.3 cm short

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Renault Captur 2024

Opening width / height

94 cm / 82 cm

Cargo width / height

102 cm / 102 cm

Cargo length seats up / down

67 cm / 144 cm

Loading sill height

78 cm

Renault Captur 2024

Measurements last checked and updated on Jul 08, 2026

Helpful tips

Use these loading tips to improve your chances of fitting NORDLI Bed frame with storage, white, 160x200 cm in Renault Captur 2024.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the Renault Captur 2024 boot

The Captur gives you a compact, upright boot rather than a long one. Behind the rear seats the floor runs about 67 cm, so tall and square boxes load well but long flat-packs sit at an angle. The opening is 94 cm wide and 82 cm tall, with a 20 cm drop from the sill down to the floor, so you lift over the lip and set the box down inside. Fold the rear bench and the floor grows to 144 cm, a gain of 77 cm that decides most borderline loads. For long boxes, feed them in low and straight along the 102 cm width and keep weight off the parcel shelf.

About the NORDLI Bed frame with storage, white, 160x200 cm package

The NORDLI bed frame with storage comes as five flat packs and totals 123.5 kg: a serious load. The largest pack is 207 cm long, 39 cm wide, 10 cm thick, and that long box drives every fit decision. Hatchbacks need the rear bench folded and the diagonal route across the cabin. Estates, large SUVs, and vans take it comfortably. Load the long pack first along the floor, then stack the four shorter cartons on top in size order. Bring a friend and a pair of gloves.

On pickup day

No fit here. The NORDLI bed frame ships as one 207 cm box, and that overshoots the Renault Captur boot by 79.3 cm with the seats up, laid diagonally across the 94 cm opening. Folding the rear bench buys back 39.1 cm, yet 40.2 cm still sticks out past the tailgate, so it stays a no either way. A box this long needs an estate with the seats down, a van, or home delivery. Measure your own boot mouth first: trim levels and the parcel shelf mounts can shift these figures by a few centimetres.

Frequently asked questions

Find quick answers about fit for NORDLI Bed frame with storage, white, 160x200 cm in Renault Captur 2024, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will NORDLI Bed frame with storage, white, 160x200 cm fit in Renault Captur 2024?

No. With seats up, it is short by 79.3 cm at Opening width, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening width, with -79.3 cm margin in seats up.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -79.3 cm margin.

How tight is this fit?

This result is in the clear no-fit band (-79.3 cm at Opening width).

Does it fit with seats up or seats down?

Seats up: No (-79.3 cm). Seats down: No (-40.2 cm). Default selection follows YES > MAYBE > NO.

Why does it not fit?

The blocker is Opening width. The worst margin is -79.3 cm in seats up, so clearance is below the required buffer.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -79.3 cm around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.