HAUGA Chest of 3 drawers, white, 70x46x84 cm
+5.5 cm margin
WillNORDLI Bed frame with storage, white, 160x200 cmfit in aPeugeot 308 2022?
No, it won't fit.
It will not fit in this setup: NORDLI Bed frame with storage, white, 160x200 cm is too large for a Peugeot 308 2022 with seats up.
Fit Details
With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 62.8 cm even with diagonal loading. We're about 95% confident in this estimate.
NORDLI Bed frame with storage, white, 160x200 cm
Box: 207 × 39 × 10 cm · 26.75 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Jun 17, 2026
Package
Status
Limiting factor
Best orientation
Package #1
207 × 39 × 10 cm
Status:62.8 cm short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
96 cm / 74 cm
Cargo width / height
82 cm / 91 cm
Cargo length seats up / down
78 cm / 148 cm
Loading sill height
70 cm
Peugeot 308 2022
Measurements last checked and updated on Jul 06, 2026
Helpful tips
Use these loading tips to improve your chances of fitting NORDLI Bed frame with storage, white, 160x200 cm in Peugeot 308 2022.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Peugeot 308 2022
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Peugeot 308 2022 boot
The Peugeot 308 gives you a hatchback boot that is short but usefully deep. The opening is 96 cm wide by 74 cm tall, and the floor runs 78 cm with the seats up, stretching to 148 cm once you fold the rear bench, a gain of 70 cm. The narrow point of the floor is 82 cm across, so wide flat loads sit fine, but anything past 78 cm long needs the seats down. The load lip sits 70 cm off the ground with a 17 cm drop, so heavy boxes lift in then settle low. It takes suitcases and boxed furniture well, long flat-pack less so. Fold the seats before you load, not halfway through.
About the NORDLI Bed frame with storage, white, 160x200 cm package
The NORDLI bed frame with storage comes as five flat packs and totals 123.5 kg: a serious load. The largest pack is 207 cm long, 39 cm wide, 10 cm thick, and that long box drives every fit decision. Hatchbacks need the rear bench folded and the diagonal route across the cabin. Estates, large SUVs, and vans take it comfortably. Load the long pack first along the floor, then stack the four shorter cartons on top in size order. Bring a friend and a pair of gloves.
On pickup day
The NORDLI bed frame will not fit the Peugeot 308, seats up or down. Its longest package is 207 cm, and with the seats up the best diagonal still leaves you 62.8 cm short of the 96 cm opening. Fold the rear seats for another 40.6 cm of floor and the gap closes, but you are still 22.2 cm short, so it stays a no. The box is 39 cm wide and only 10 cm tall, so length is the single obstacle here. A frame this long really wants an estate or a van with the bench down. Measure your own opening before the trip, since real trims run a little tight.
Frequently asked questions
Find quick answers about fit for NORDLI Bed frame with storage, white, 160x200 cm in Peugeot 308 2022, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will NORDLI Bed frame with storage, white, 160x200 cm fit in Peugeot 308 2022?
No. With seats up, it is short by 62.8 cm at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -62.8 cm margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -62.8 cm margin.
How tight is this fit?
This result is in the clear no-fit band (-62.8 cm at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-62.8 cm). Seats down: No (-22.2 cm). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -62.8 cm in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -62.8 cm around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.