NORDEN Gateleg table, birch, 26/89/152x80 cm
+17 cm margin
WillNORDLI Bed frame with storage, white, 160x200 cmfit in aPeugeot 3008 2025?
No, it won't fit.
It will not fit in this setup: NORDLI Bed frame with storage, white, 160x200 cm is too large for a Peugeot 3008 2025 with seats up.
Fit Details
With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 55.7 cm even with diagonal loading. We're about 95% confident in this estimate.
NORDLI Bed frame with storage, white, 160x200 cm
Box: 207 × 39 × 10 cm · 26.75 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Jun 17, 2026
Package
Status
Limiting factor
Best orientation
Package #1
207 × 39 × 10 cm
Status:55.7 cm short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
102 cm / 78 cm
Cargo width / height
101 cm / 89 cm
Cargo length seats up / down
99 cm / 167 cm
Loading sill height
80 cm
Peugeot 3008 2025
Measurements last checked and updated on Jul 19, 2026
Helpful tips
Use these loading tips to improve your chances of fitting NORDLI Bed frame with storage, white, 160x200 cm in Peugeot 3008 2025.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Peugeot 3008 2025
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Peugeot 3008 2025 boot
The 3008 gives you a wide, square loading space. The tailgate opening measures 102 cm wide × 78 cm tall and the floor stays 101 cm across at its narrowest, so you keep almost full width right to the back. With the rear seats up you get 99 cm of floor, which suits boxed appliances and flat packs up to about a metre. Folding the bench adds 68 cm and takes you to 167 cm, the biggest single change you can make here. The sill sits 80 cm off the ground with an 11 cm drop to the floor, so lift high, then slide down and forward.
About the NORDLI Bed frame with storage, white, 160x200 cm package
The NORDLI bed frame with storage comes as five flat packs and totals 123.5 kg: a serious load. The largest pack is 207 cm long, 39 cm wide, 10 cm thick, and that long box drives every fit decision. Hatchbacks need the rear bench folded and the diagonal route across the cabin. Estates, large SUVs, and vans take it comfortably. Load the long pack first along the floor, then stack the four shorter cartons on top in size order. Bring a friend and a pair of gloves.
On pickup day
The NORDLI bed frame stays behind. Its single package is 207 cm × 39 cm × 10 cm and the 3008 opening is 102 cm wide × 78 cm tall, which puts you 55.7 cm short on the best diagonal with the seats up. Dropping the rear bench adds 39.5 cm of usable length and still leaves 16.2 cm sitting outside the boot. Two people and a clever angle will not close that gap. Book delivery, or borrow a van for the hour. If you want to test it yourself, measure the opening corner to corner, not across the middle.
Frequently asked questions
Find quick answers about fit for NORDLI Bed frame with storage, white, 160x200 cm in Peugeot 3008 2025, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will NORDLI Bed frame with storage, white, 160x200 cm fit in Peugeot 3008 2025?
No. With seats up, it is short by 55.7 cm at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -55.7 cm margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -55.7 cm margin.
How tight is this fit?
This result is in the clear no-fit band (-55.7 cm at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-55.7 cm). Seats down: No (-16.2 cm). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -55.7 cm in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -55.7 cm around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.