BRIMNES Bed frame with storage, white/Luröy, Standard Double
+16.8 cm margin
WillNORDLI Bed frame with storage, white, 160x200 cmfit in aPeugeot 208 2020?
No, it won't fit.
It will not fit in this setup: NORDLI Bed frame with storage, white, 160x200 cm is too large for a Peugeot 208 2020 with seats up.
Fit Details
With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 84.2 cm even with diagonal loading. We're about 95% confident in this estimate.
NORDLI Bed frame with storage, white, 160x200 cm
Box: 207 × 39 × 10 cm · 26.75 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Jun 17, 2026
Package
Status
Limiting factor
Best orientation
Package #1
207 × 39 × 10 cm
Status:84.2 cm short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
86 cm / 75 cm
Cargo width / height
96 cm / 93 cm
Cargo length seats up / down
67 cm / 131 cm
Loading sill height
71 cm
Peugeot 208 2020
Measurements last checked and updated on Jun 23, 2026
Helpful tips
Use these loading tips to improve your chances of fitting NORDLI Bed frame with storage, white, 160x200 cm in Peugeot 208 2020.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Peugeot 208 2020
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Peugeot 208 2020 boot
The Peugeot 208 2020 gives you a compact boot with a narrow mouth. The opening is 86 cm wide by 75 cm tall, and the floor behind it runs 67 cm with the seats up. Drop the rear bench and the floor opens to 131 cm, a gain of 64 cm, which nearly doubles your usable length. Across the floor the narrow point is 96 cm. It takes weekly shopping and soft bags with ease, but a wide rigid box can snag on that 86 cm opening. The sill stands 71 cm high with a gentle 18 cm drop inside, so rest the load on the lip and push it in.
About the NORDLI Bed frame with storage, white, 160x200 cm package
The NORDLI bed frame with storage comes as five flat packs and totals 123.5 kg: a serious load. The largest pack is 207 cm long, 39 cm wide, 10 cm thick, and that long box drives every fit decision. Hatchbacks need the rear bench folded and the diagonal route across the cabin. Estates, large SUVs, and vans take it comfortably. Load the long pack first along the floor, then stack the four shorter cartons on top in size order. Bring a friend and a pair of gloves.
On pickup day
No, the NORDLI bed frame will not go into the Peugeot 208. The main box is 207 cm and the 208 opening is only 86 cm wide, so the diagonal still leaves you 84.2 cm short with the seats up. Fold the rear bench and you gain floor length, but you are 50.9 cm short, so folding does not save this one. It comes as a single box, so there is nothing to split. Check your own opening with a tape first, as the parcel shelf and side trim take real width off the listed number.
Frequently asked questions
Find quick answers about fit for NORDLI Bed frame with storage, white, 160x200 cm in Peugeot 208 2020, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will NORDLI Bed frame with storage, white, 160x200 cm fit in Peugeot 208 2020?
No. With seats up, it is short by 84.2 cm at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -84.2 cm margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -84.2 cm margin.
How tight is this fit?
This result is in the clear no-fit band (-84.2 cm at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-84.2 cm). Seats down: No (-50.9 cm). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -84.2 cm in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -84.2 cm around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.