HAUGA Chest of 3 drawers, white, 70x46x84 cm
+13.5 cm margin
WillNORDLI Bed frame with storage, white, 160x200 cmfit in aPeugeot 2008 2020?
No, it won't fit.
It will not fit in this setup: NORDLI Bed frame with storage, white, 160x200 cm is too large for a Peugeot 2008 2020 with seats up.
Fit Details
With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 62.7 cm even with diagonal loading. We're about 95% confident in this estimate.
NORDLI Bed frame with storage, white, 160x200 cm
Box: 207 × 39 × 10 cm · 26.75 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Jun 17, 2026
Package
Status
Limiting factor
Best orientation
Package #1
207 × 39 × 10 cm
Status:62.7 cm short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
102 cm / 78 cm
Cargo width / height
96 cm / 88 cm
Cargo length seats up / down
78 cm / 155 cm
Loading sill height
71 cm
Peugeot 2008 2020
Measurements last checked and updated on Jul 16, 2026
Helpful tips
Use these loading tips to improve your chances of fitting NORDLI Bed frame with storage, white, 160x200 cm in Peugeot 2008 2020.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Peugeot 2008 2020
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Peugeot 2008 2020 boot
The Peugeot 2008 boot is a compact space that changes character the moment you fold the rear seats. Upright, the floor runs 78 cm, which handles a weekly shop and a couple of cases but little that is long. Fold the bench and it stretches to 155 cm, a gain of 77 cm, so long flat boxes become possible. The opening is 102 cm wide by 78 cm tall, wider than the 96 cm floor, so boxes clear the mouth but rely on that folded length. The load lip sits 71 cm off the ground with only a 10 cm drop to the floor, so lift to the sill, then slide straight in.
About the NORDLI Bed frame with storage, white, 160x200 cm package
The NORDLI bed frame with storage comes as five flat packs and totals 123.5 kg: a serious load. The largest pack is 207 cm long, 39 cm wide, 10 cm thick, and that long box drives every fit decision. Hatchbacks need the rear bench folded and the diagonal route across the cabin. Estates, large SUVs, and vans take it comfortably. Load the long pack first along the floor, then stack the four shorter cartons on top in size order. Bring a friend and a pair of gloves.
On pickup day
Call this a no in the Peugeot 2008. The NORDLI base packs into a 207 cm by 39 cm by 10 cm box, and 207 cm is simply too long for the 102 cm wide by 78 cm tall opening: seats up you are 62.7 cm out, even angled across the boot. Drop the rear bench and you gain 42 cm of length, but the box still overshoots by 20.7 cm, so it does not sit inside. For a frame this size, plan on a van or roof bars. Check the longest package on the label against the opening, and allow a little tolerance on the tape.
Frequently asked questions
Find quick answers about fit for NORDLI Bed frame with storage, white, 160x200 cm in Peugeot 2008 2020, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will NORDLI Bed frame with storage, white, 160x200 cm fit in Peugeot 2008 2020?
No. With seats up, it is short by 62.7 cm at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -62.7 cm margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -62.7 cm margin.
How tight is this fit?
This result is in the clear no-fit band (-62.7 cm at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-62.7 cm). Seats down: No (-20.7 cm). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -62.7 cm in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -62.7 cm around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.