NORDEN Gateleg table, birch, 26/89/152x80 cm
+15 cm margin
WillNORDLI Bed frame with storage, white, 160x200 cmfit in aHyundai Tucson 2025?
No, it won't fit.
It will not fit in this setup: NORDLI Bed frame with storage, white, 160x200 cm is too large for a Hyundai Tucson 2025 with seats up.
Fit Details
With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 60.4 cm even with diagonal loading. We're about 95% confident in this estimate.
NORDLI Bed frame with storage, white, 160x200 cm
Box: 207 × 39 × 10 cm · 26.75 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Jun 17, 2026
Package
Status
Limiting factor
Best orientation
Package #1
207 × 39 × 10 cm
Status:60.4 cm short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
102 cm / 73 cm
Cargo width / height
104 cm / 73 cm
Cargo length seats up / down
91 cm / 173 cm
Loading sill height
73 cm
Hyundai Tucson 2025
Measurements last checked and updated on Jun 25, 2026
Helpful tips
Use these loading tips to improve your chances of fitting NORDLI Bed frame with storage, white, 160x200 cm in Hyundai Tucson 2025.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Hyundai Tucson 2025
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Hyundai Tucson 2025 boot
The Tucson's boot is a roomy, square space that transforms when you fold the rear seats. Seats up, the floor runs 91 cm deep behind a 102 cm wide by 73 cm tall opening. Fold the bench and the floor reaches 173 cm, a gain of 82 cm, which is this boot's best feature. The floor stays a generous 104 cm across at its narrowest, so wide flat boxes lie flat with room to spare. The load lip sits level with the floor, no drop to heave over. Long flat-pack panels need the seats down, so plan your load around that fold.
About the NORDLI Bed frame with storage, white, 160x200 cm package
The NORDLI bed frame with storage comes as five flat packs and totals 123.5 kg: a serious load. The largest pack is 207 cm long, 39 cm wide, 10 cm thick, and that long box drives every fit decision. Hatchbacks need the rear bench folded and the diagonal route across the cabin. Estates, large SUVs, and vans take it comfortably. Load the long pack first along the floor, then stack the four shorter cartons on top in size order. Bring a friend and a pair of gloves.
On pickup day
No fit. The longest NORDLI box is 207 cm and the Tucson opening is 102 cm wide, so diagonally you are 60.4 cm short with the rear seats up. Folding the bench brings that to 14.7 cm, closer but not there, and the box will not pass at any angle. A 207 cm panel has no diagonal that fits this opening. Plan for home delivery or a van. Always measure your own boot first, since the parcel shelf and wheel arches can take a few centimetres off the usable opening here.
Frequently asked questions
Find quick answers about fit for NORDLI Bed frame with storage, white, 160x200 cm in Hyundai Tucson 2025, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will NORDLI Bed frame with storage, white, 160x200 cm fit in Hyundai Tucson 2025?
No. With seats up, it is short by 60.4 cm at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -60.4 cm margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -60.4 cm margin.
How tight is this fit?
This result is in the clear no-fit band (-60.4 cm at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-60.4 cm). Seats down: No (-14.7 cm). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -60.4 cm in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -60.4 cm around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.