Willfit in a?

No, it won't fit.

It will not fit in this setup: NORDLI Bed frame w storage and headboard, white, 140x200 cm is too large for a Toyota Yaris 2018 with seats up.

Toyota Yaris 2018

Fit Details

With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 47.6 cm even with diagonal loading. We're about 95% confident in this estimate.

NORDLI Bed frame w storage and headboard, white, 140x200 cm

NORDLI Bed frame w storage and headboard, white, 140x200 cm

Box: 155 × 28 × 11 cm · 16.8 kg

Based on IKEA UK (United Kingdom).

Package dimensions last checked and updated on Jun 17, 2026

  • Package #1

    155 × 28 × 11 cm

    Status:47.6 cm short

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Toyota Yaris 2018

Opening width / height

88 cm / 87 cm

Cargo width / height

101 cm / 104 cm

Cargo length seats up / down

68 cm / 133 cm

Loading sill height

68 cm

Toyota Yaris 2018

Measurements last checked and updated on Jul 15, 2026

Helpful tips

Use these loading tips to improve your chances of fitting NORDLI Bed frame w storage and headboard, white, 140x200 cm in Toyota Yaris 2018.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the Toyota Yaris 2018 boot

The Toyota Yaris gives you a compact hatchback boot. The opening is 88 cm wide and 87 cm tall, and the floor runs 68 cm deep with the seats up, enough for a weekly shop, a pushchair, or a few small boxes. Fold the rear bench and the floor extends to 133 cm, a gain of 65 cm, which nearly doubles what you can carry. Long loads like bed frames or wardrobe panels still overhang and will not go. You lift over a 68 cm sill then drop 17 cm into the well, so slide heavy boxes in rather than lower them by hand.

About the NORDLI Bed frame w storage and headboard, white, 140x200 cm package

The NORDLI bed with storage and headboard is the heaviest item in this catalogue: seven flat packs totalling 154.7 kg. The longest pack runs 207 cm by 39 cm by 10 cm, the same as the standard NORDLI, but the extra cartons make boot planning matter more. You need a large estate, an SUV, or a van. Two trips beat overloading one car. Load the long pack first along the floor, then stack the headboard panels and the smaller boxes by descending size. Bring two pairs of hands.

On pickup day

This NORDLI bed frame does not fit the Toyota Yaris. The box is 155 cm long, so with the seats up you fall 47.6 cm short of the 88 cm opening. Folding the rear bench adds 32.6 cm, but you are still 15 cm short against the 133 cm folded floor. It is one long box, so there is no splitting it across trips. You want a car with a longer load bay, an estate or an SUV with the seats down. Check your own boot depth first, as folded length varies by model year.

Frequently asked questions

Find quick answers about fit for NORDLI Bed frame w storage and headboard, white, 140x200 cm in Toyota Yaris 2018, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will NORDLI Bed frame w storage and headboard, white, 140x200 cm fit in Toyota Yaris 2018?

No. With seats up, it is short by 47.6 cm at Opening width, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening width, with -47.6 cm margin in seats up.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -47.6 cm margin.

How tight is this fit?

This result is in the clear no-fit band (-47.6 cm at Opening width).

Does it fit with seats up or seats down?

Seats up: No (-47.6 cm). Seats down: No (-15 cm). Default selection follows YES > MAYBE > NO.

Why does it not fit?

The blocker is Opening width. The worst margin is -47.6 cm in seats up, so clearance is below the required buffer.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -47.6 cm around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.