KIVIK 3-seat sofa, Tibbleby beige/grey
+28 cm margin
WillNORDEN Gateleg table, birch, 26/89/152x80 cmfit in aToyota Yaris 2018?
Yes, it will fit!
Good news: NORDEN Gateleg table, birch, 26/89/152x80 cm should fit diagonally in a Toyota Yaris 2018 with seats up.
Fit Details
With seats up, Good news - this package should fit. You have about +7.2 cm of clearance at opening width when loading diagonal. We're about 95% confident in this estimate.
NORDEN Gateleg table, birch, 26/89/152x80 cm
Box: 81 × 73 × 11 cm · 21.4 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Jun 17, 2026
Package
Status
Limiting factor
Best orientation
Package #1
81 × 73 × 11 cm
Status:+7.2 cm margin
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
88 cm / 87 cm
Cargo width / height
101 cm / 104 cm
Cargo length seats up / down
68 cm / 133 cm
Loading sill height
68 cm
Toyota Yaris 2018
Measurements last checked and updated on Jul 15, 2026
Helpful tips
Use these loading tips to improve your chances of fitting NORDEN Gateleg table, birch, 26/89/152x80 cm in Toyota Yaris 2018.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Other items to check in Toyota Yaris 2018
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Toyota Yaris 2018 boot
The Toyota Yaris gives you a compact hatchback boot. The opening is 88 cm wide and 87 cm tall, and the floor runs 68 cm deep with the seats up, enough for a weekly shop, a pushchair, or a few small boxes. Fold the rear bench and the floor extends to 133 cm, a gain of 65 cm, which nearly doubles what you can carry. Long loads like bed frames or wardrobe panels still overhang and will not go. You lift over a 68 cm sill then drop 17 cm into the well, so slide heavy boxes in rather than lower them by hand.
About the NORDEN Gateleg table, birch, 26/89/152x80 cm package
NORDEN Gateleg table ships in two boxes, with the largest at 83 cm by 66 cm by 11 cm and a total load weight around 47 kg. The shape is compact for a table, and at 83 cm long it fits in most boots with the seats up, including small hatchbacks. The 66 cm width is the dimension to watch since narrow boot openings can pinch it. Load the larger box in flat first, set the smaller package alongside, and protect the corners with a blanket since the edges are exposed.
Frequently asked questions
Find quick answers about fit for NORDEN Gateleg table, birch, 26/89/152x80 cm in Toyota Yaris 2018, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will NORDEN Gateleg table, birch, 26/89/152x80 cm fit in Toyota Yaris 2018?
Yes. With seats up, it fits with +7.2 cm at Opening width. Best orientation: diagonal.
What is the tightest part?
The limiting factor is Opening width, with +7.2 cm margin in seats up.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with +7.2 cm margin.
How tight is this fit?
This result is in the tight positive clearance band (+7.2 cm at Opening width).
Does it fit with seats up or seats down?
Seats up: Yes (+7.2 cm). Seats down: Yes (+12 cm). Default selection follows YES > MAYBE > NO.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with +7.2 cm around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.