KIVIK 3-seat sofa, Tibbleby beige/grey
+24 cm margin
WillNORDEN Gateleg table, birch, 26/89/152x80 cmfit in aToyota Corolla 2019?
Maybe, it's a tight fit.
It might fit, but it's tight: NORDEN Gateleg table, birch, 26/89/152x80 cm is borderline diagonally in a Toyota Corolla 2019 with seats up.
Fit Details
With seats up, It's close. This package is a borderline fit at opening height (+1 cm), best loaded diagonal. See the Helpful tips section below for practical loading suggestions. We're about 75% confident in this estimate.
NORDEN Gateleg table, birch, 26/89/152x80 cm
Box: 81 × 73 × 11 cm · 21.4 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Jun 17, 2026
Package
Status
Limiting factor
Best orientation
Package #1
81 × 73 × 11 cm
Status:+1 cm tight
Limited by
Limiting factor:Opening height
Best orientation:Diagonal
Vehicle limits
Opening width / height
99 cm / 77 cm
Cargo width / height
67 cm / 96 cm
Cargo length seats up / down
81 cm / 152 cm
Loading sill height
73 cm
Toyota Corolla 2019
Measurements last checked and updated on Mar 10, 2026
Helpful tips
Use these loading tips to improve your chances of fitting NORDEN Gateleg table, birch, 26/89/152x80 cm in Toyota Corolla 2019.
Manage opening height
Keep the highest edge low at the trunk opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Clear real-world obstacles
Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.
Alternatives that fit in Toyota Corolla 2019
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Toyota Corolla 2019 boot
The Corolla 2019 boot is a sedan-style space: an 81 cm floor with the seats up, a 67 cm narrow point at the wheel arches, and an opening 99 cm wide by 77 cm tall. Folding the rear bench gains you a useful 71 cm, taking the floor to 152 cm. The sill sits high at 73 cm with a 19 cm drop to the load floor, so heavy boxes need lifting clean over the lip. This boot handles small to mid-size flat packs and shopping well. Anything past 90 cm needs the seats down and a careful slide.
About the NORDEN Gateleg table, birch, 26/89/152x80 cm package
NORDEN Gateleg table ships in two boxes, with the largest at 83 cm by 66 cm by 11 cm and a total load weight around 47 kg. The shape is compact for a table, and at 83 cm long it fits in most boots with the seats up, including small hatchbacks. The 66 cm width is the dimension to watch since narrow boot openings can pinch it. Load the larger box in flat first, set the smaller package alongside, and protect the corners with a blanket since the edges are exposed.
On pickup day
The Corolla can take the NORDEN, but it is tight. The boot opening height of 77 cm is your hard limit, leaving just 1 cm to spare on the longest package. Slide it in diagonally with seats up, longer 83 cm side first, and ease it past the lip. Folding the rear bench gives you a 152 cm floor, but it does not change the opening, so the 1 cm margin stays. Bring a tape measure and check the parcel shelf clears before you set off.
Frequently asked questions
Find quick answers about fit for NORDEN Gateleg table, birch, 26/89/152x80 cm in Toyota Corolla 2019, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will NORDEN Gateleg table, birch, 26/89/152x80 cm fit in Toyota Corolla 2019?
Maybe. With seats up, this is a borderline fit at Opening height (+1 cm). Best orientation: diagonal.
What is the tightest part?
The limiting factor is Opening height, with +1 cm margin in seats up.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with +1 cm around the limiting point.
What could change the result in real life?
Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.
How tight is this fit?
This result is in the very tight borderline band (+1 cm at Opening height).
Does it fit with seats up or seats down?
Seats up: Maybe (+1 cm). Seats down: Maybe (+1 cm). Default selection follows YES > MAYBE > NO.
What can I try to make it work?
Use diagonal loading and focus on opening height. Keep the highest edge low at the trunk opening. Load diagonally first, then straighten once inside.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening height) with +1 cm margin.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 75 out of 100 based on available dimensions and margin tightness.