FJÄLLBO Shelving unit, black, 100x136 cm
+45.1 cm margin
WillMYDAL Bunk bed frame, white, 90x200 cmfit in aToyota RAV4 2024?
Maybe, it's a tight fit.
It might fit, but it's tight: MYDAL Bunk bed frame, white, 90x200 cm is borderline diagonally in a Toyota RAV4 2024 with seats down.
Fit Details
With seats down, It's close. This package is a borderline fit at opening width (-2.3 cm), best loaded diagonal. See the Helpful tips section below for practical loading suggestions. We're about 75% confident in this estimate.
MYDAL Bunk bed frame, white, 90x200 cm
Box: 205 × 46 × 8 cm · 28.5 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Jun 17, 2026
Package
Status
Limiting factor
Best orientation
Package #1
205 × 46 × 8 cm
Status:-2.3 cm tight
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
104 cm / 87 cm
Cargo width / height
100 cm / 92 cm
Cargo length seats up / down
101 cm / 181 cm
Loading sill height
69 cm
Toyota RAV4 2024
Measurements last checked and updated on Mar 10, 2026
Helpful tips
Use these loading tips to improve your chances of fitting MYDAL Bunk bed frame, white, 90x200 cm in Toyota RAV4 2024.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Clear real-world obstacles
Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.
Alternatives that fit in Toyota RAV4 2024
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Toyota RAV4 2024 boot
The RAV4 2024 is the easy case in this catalogue. The opening runs 104 cm wide by 87 cm tall, the boot floor measures 101 cm long with the seats up and 181 cm folded, and the cargo width stays a consistent 100 cm right back to the rear seats. The sill is a low 69 cm with a 5 cm drop, so you load close to the ground. This boot swallows mid-size flat packs upright, multi-pack loads side by side, and most coffee tables seats up. Anything past 1.8 m still needs the bench folded.
About the MYDAL Bunk bed frame, white, 90x200 cm package
The MYDAL bunk bed ships in two flat cartons, the largest 205 cm long, 46 cm wide and 8 cm thick. The 2.05 m length is the constraint on most cars: the rails are too long for boots with seats up, and the second carton stacks behind. Combined the two boxes weigh 56.5 kg, so plan for two people. An estate, a hatchback with the rear bench folded, or an SUV with a long floor will take it. Load the longer carton first along the centre, slide it forward, then drop the second on top with a blanket between.
On pickup day
Seats up, the MYDAL bed is a no in your RAV4, the 205 cm box runs 50 cm past the diagonal. Fold the rear bench and you stretch to 181 cm of floor with a 104 cm opening, which puts you about 2 cm short on the diagonal, close enough to count as a maybe. Confidence sits around 75 percent, so this is a tape measure decision, not a click and go. The two MYDAL packages are flat and slim, so a small diagonal lean tends to find the missing centimetres. Check against the parcel shelf at home first.
Frequently asked questions
Find quick answers about fit for MYDAL Bunk bed frame, white, 90x200 cm in Toyota RAV4 2024, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will MYDAL Bunk bed frame, white, 90x200 cm fit in Toyota RAV4 2024?
Maybe. With seats down, this is a borderline fit at Opening width (-2.3 cm). Best orientation: diagonal.
What is the tightest part?
The limiting factor is Opening width, with -2.3 cm margin in seats down.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Maybe.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -2.3 cm margin.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats down.
Does it fit with seats up or seats down?
Seats up: No (-49.6 cm). Seats down: Maybe (-2.3 cm). Default selection follows YES > MAYBE > NO.
What can I try to make it work?
Use diagonal loading and focus on opening width. Keep the narrow edge leading while entering the opening. Load diagonally first, then straighten once inside.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -2.3 cm around the limiting point.
What could change the result in real life?
Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.
How tight is this fit?
This result is in the borderline band (-2.3 cm at Opening width).