Willfit in a?

No, it won't fit.

It will not fit in this setup: MYDAL Bunk bed frame, white, 90x200 cm is too large for a Peugeot 2008 2020 with seats up.

Peugeot 2008 2020

Fit Details

With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 59.8 cm even with diagonal loading. We're about 95% confident in this estimate.

MYDAL Bunk bed frame, white, 90x200 cm

MYDAL Bunk bed frame, white, 90x200 cm

Box: 205 × 46 × 8 cm · 28.5 kg

Based on IKEA UK (United Kingdom).

Package dimensions last checked and updated on Jun 17, 2026

  • Package #1

    205 × 46 × 8 cm

    Status:59.8 cm short

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Peugeot 2008 2020

Opening width / height

102 cm / 78 cm

Cargo width / height

96 cm / 88 cm

Cargo length seats up / down

78 cm / 155 cm

Loading sill height

71 cm

Peugeot 2008 2020

Measurements last checked and updated on Jul 16, 2026

Helpful tips

Use these loading tips to improve your chances of fitting MYDAL Bunk bed frame, white, 90x200 cm in Peugeot 2008 2020.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the Peugeot 2008 2020 boot

The Peugeot 2008 boot is a compact space that changes character the moment you fold the rear seats. Upright, the floor runs 78 cm, which handles a weekly shop and a couple of cases but little that is long. Fold the bench and it stretches to 155 cm, a gain of 77 cm, so long flat boxes become possible. The opening is 102 cm wide by 78 cm tall, wider than the 96 cm floor, so boxes clear the mouth but rely on that folded length. The load lip sits 71 cm off the ground with only a 10 cm drop to the floor, so lift to the sill, then slide straight in.

About the MYDAL Bunk bed frame, white, 90x200 cm package

The MYDAL bunk bed ships in two flat cartons, the largest 205 cm long, 46 cm wide and 8 cm thick. The 2.05 m length is the constraint on most cars: the rails are too long for boots with seats up, and the second carton stacks behind. Combined the two boxes weigh 56.5 kg, so plan for two people. An estate, a hatchback with the rear bench folded, or an SUV with a long floor will take it. Load the longer carton first along the centre, slide it forward, then drop the second on top with a blanket between.

Frequently asked questions

Find quick answers about fit for MYDAL Bunk bed frame, white, 90x200 cm in Peugeot 2008 2020, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will MYDAL Bunk bed frame, white, 90x200 cm fit in Peugeot 2008 2020?

No. With seats up, it is short by 59.8 cm at Opening width, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening width, with -59.8 cm margin in seats up.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -59.8 cm margin.

How tight is this fit?

This result is in the clear no-fit band (-59.8 cm at Opening width).

Does it fit with seats up or seats down?

Seats up: No (-59.8 cm). Seats down: No (-17.9 cm). Default selection follows YES > MAYBE > NO.

Why does it not fit?

The blocker is Opening width. The worst margin is -59.8 cm in seats up, so clearance is below the required buffer.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -59.8 cm around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.