Willfit in a?

No, it won't fit.

It will not fit in this setup: KALLAX Shelving unit, white, 147x147 cm is too large for a Peugeot 208 2020 with seats up.

Peugeot 208 2020

Fit Details

With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 40 cm even with diagonal loading. We're about 95% confident in this estimate.

KALLAX Shelving unit, white, 147x147 cm

KALLAX Shelving unit, white, 147x147 cm

Box: 144 × 40 × 11 cm · 19.36 kg

Based on IKEA UK (United Kingdom).

Package dimensions last checked and updated on Jun 17, 2026

  • Package #1

    144 × 40 × 11 cm

    Status:40 cm short

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Peugeot 208 2020

Opening width / height

86 cm / 75 cm

Cargo width / height

96 cm / 93 cm

Cargo length seats up / down

67 cm / 131 cm

Loading sill height

71 cm

Peugeot 208 2020

Measurements last checked and updated on Jun 23, 2026

Helpful tips

Use these loading tips to improve your chances of fitting KALLAX Shelving unit, white, 147x147 cm in Peugeot 208 2020.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the Peugeot 208 2020 boot

The Peugeot 208 2020 gives you a compact boot with a narrow mouth. The opening is 86 cm wide by 75 cm tall, and the floor behind it runs 67 cm with the seats up. Drop the rear bench and the floor opens to 131 cm, a gain of 64 cm, which nearly doubles your usable length. Across the floor the narrow point is 96 cm. It takes weekly shopping and soft bags with ease, but a wide rigid box can snag on that 86 cm opening. The sill stands 71 cm high with a gentle 18 cm drop inside, so rest the load on the lip and push it in.

About the KALLAX Shelving unit, white, 147x147 cm package

The KALLAX shelving unit ships in two cartons, the larger 151 cm long, 40 cm wide and 16 cm thick. At 1.51 m the box is too long to lie flat in a city hatchback boot, but it slots into a midsize hatchback with the rear bench folded, an estate, or an SUV. Combined weight is 37.4 kg, so a single confident lift works for most people. Load the longer carton flat against the floor, then slot the second on top, and pad the corners: the surface marks if you drag it across boot trim.

Frequently asked questions

Find quick answers about fit for KALLAX Shelving unit, white, 147x147 cm in Peugeot 208 2020, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will KALLAX Shelving unit, white, 147x147 cm fit in Peugeot 208 2020?

No. With seats up, it is short by 40 cm at Opening width, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening width, with -40 cm margin in seats up.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -40 cm margin.

How tight is this fit?

This result is in the clear no-fit band (-40 cm at Opening width).

Does it fit with seats up or seats down?

Seats up: No (-40 cm). Seats down: No (-6.6 cm). Default selection follows YES > MAYBE > NO.

Why does it not fit?

The blocker is Opening width. The worst margin is -40 cm in seats up, so clearance is below the required buffer.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -40 cm around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.