
HAUGA Chest of 6 drawers, white, 138x46x84 cm
+11 cm margin
Maybe, it's a tight fit.

Fit Details

KALLAX Shelving unit, white, 147x147 cm
Box: 151 × 40 × 16 cm · 18 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Aug 06, 2026
Package
Status
Limiting factor
Best orientation
Package #1
151 × 40 × 16 cm
Status:-0.5 cm tight
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Package #2
144 × 40 × 11 cm
Status:+7.4 cm margin
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits

Opening width / height
95 cm / 66 cm
Cargo width / height
102 cm / 74 cm
Cargo length seats up / down
75 cm / 146 cm
Loading sill height
70 cm
BMW 1 Series 2020
Measurements last checked and updated on Sep 01, 2026
Helpful tips
Use these loading tips to improve your chances of fitting KALLAX Shelving unit, white, 147x147 cm in BMW 1 Series 2020.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Plan package order
Load each package one at a time. Individual package fit does not guarantee all packages will fit stacked together.
Clear real-world obstacles
Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.
Alternatives that fit in BMW 1 Series 2020
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the BMW 1 Series 2020 boot
The 1 Series has a short hatch boot with a decent mouth. The opening is 95 cm wide by 66 cm tall, the floor gives you 75 cm with the rear seats up and 146 cm folded, and the width between the arches is 102 cm. Width is its strength, length is not: you have more room across the car than front to back. Weekly shopping, buggies and cases fit fine, anything near two metres does not. The sill sits 70 cm up with an 8 cm drop, so most loads slide in once the parcel shelf is out.
About the KALLAX Shelving unit, white, 147x147 cm package
The KALLAX shelving unit ships in two cartons, the larger 151 cm long, 40 cm wide and 16 cm thick. At 1.51 m the box is too long to lie flat in a city hatchback boot, but it slots into a midsize hatchback with the rear bench folded, an estate, or an SUV. Combined weight is 37.4 kg, so a single confident lift works for most people. Load the longer carton flat against the floor, then slot the second on top, and pad the corners: the surface marks if you drag it across boot trim.
Frequently asked questions
Find quick answers about fit for KALLAX Shelving unit, white, 147x147 cm in BMW 1 Series 2020, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will KALLAX Shelving unit, white, 147x147 cm fit in BMW 1 Series 2020?
Maybe. With seats down, this is a borderline fit at Opening width (-0.5 cm). Best orientation: diagonal.
What is the tightest part?
The limiting factor is Opening width, with -0.5 cm margin in seats down.
What can I try to make it work?
Use diagonal loading and focus on opening width. Keep the narrow edge leading while entering the opening. Load diagonally first, then straighten once inside.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -0.5 cm around the limiting point.
Do all packages fit in the car at the same time?
We test each package individually. All packages fitting individually does not guarantee they will fit stacked together. You may need multiple trips.
Does it fit with seats up or seats down?
Seats up: No (-38.2 cm). Seats down: Maybe (-0.5 cm). Default selection follows YES > MAYBE > NO.
Which package is the hardest to load?
Package #1 (151 × 40 × 16 cm) is the tightest, with -0.5 cm at Opening width.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Maybe.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -0.5 cm margin.
What could change the result in real life?
Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.